2021年

A01ア

[1]* L. Li, Z.H. Chen, S. Kuroiwa, M. Ito, K. Kishida, H. Inui, E.P. George
"Tensile and compressive plastic deformation behavior of medium-entropy Cr-Co-Ni single crystals from cryogenic to elevated temperatures"
International Journal of Plasticity, Vol.148 (2022), 103144.

[2]* K. Kishida, S. Nakatsuka, H. Nose, H. Inui
"Room-temperature deformation of single crystals of transition-metal disilicides (TMSi₂) with the C11_b (TM = Mo) and C40 (TM = V, Cr, Nb and Ta) structures investigated by micropillar compression"
Acta Materialia, Vol.223 (2022), 117468.

[3]* N. Hanasaki, M. Oda, K. Niitsu, K. Ehara, H. Murakawa, H. Sakai, H. Nitani, H. Abe, H. Sagayama, H. Utsuka, T. Karube, H. Inui
"Element dependence of local disorder in medium-entropy alloy CrCoNi"
AIP Advances, Vol.11 (2021), 125216.  

[4]* Z.H. Chen, H. Inui
"Micropillar compression deformation of single crystals of Fe₃Ge with the L1₂ structure"
Acta Materialia, Vol.208 (2021), 116779. ​​​ 

[5]* B. Paul, N.L. Okamoto, M. Kusakari, Z. H. Chen, K. Kishida, H. Inui, S. Otani
"Plastic deformation of single crystals of CrB₂, TiB₂ and ZrB₂ with the hexagonal AlB₂ structure"
Acta Materialia, Vol.211 (2021), 116857.

[6]* Z.H. Chen, B. Paul, S. Majumdar, N.L. Okamoto, K. Kishida, H. Inui, S. Otani
"Room-temperature deformation of single crystals of ZrB₂ and TiB₂ with the hexagonal AlB₂ structure investigated by micropillar compression"
Scientific Reports, Vol.11 (2021), 14265.   

[7] T. Hamada, M. Higashi, K. Niitsu, H. Inui
"Phase equilibria among η-Fe₂Al₅ and its higher-ordered phases"
Science and Technology of Advanced Materials, Vol.22 (2021), 373-385.  

[8] T. Mineta, S. Torii, K. Nagayama, H. Sato
"Effect of passivation treatment and arc current on the properties of Zn fine particles prepared by arc plasma method"
Powder Technology, Vol.308 (2021), 1-6.

[9]* T. Mineta, K. Kumatani, H. Adachi, H. Sato
"Dependence of the mechanical properties and microstructure of ultralight magnesium–lithium–aluminum alloy on heat treatment conditions"
Materials Science & Engineering Technology, Vol.52 (2021), 339-345.

[10]* M. Tanaka, S. Okajo, S. Yamasaki, T. Morikawa    
"Persistent slip observed in TiZrNbHfTa: A body-centered high-entropy cubic alloy"
Scripta Materialia, Vol.200 (2021), 113895.

[11] T. Morikawa, S. Yoshioka, M. Tanaka, Y. Toji, K. Hasegawa
"Analysis of Work Hardening Behavior in Ferrite-Martensite Dual-phase Steels Using Micro-grid Method"
ISIJ International, Vol.61 (2021), 625-631.

[12] B.R. Anne, M. Tanaka, S. Yamasaki, T. Morikawa
"Effects of Temperature and Stress Ratio on Stage II Fatigue Crack Propagation in Bimodal Ti–6Al–4V"
Materials Transactions, Vol.62 (2021), 968-974.

[13] T. Suzuki, M. Tanaka, T. Morikawa, J. Fujise, T. Ono
"Tensile Deformation of Si Single Crystals with Easy Glide Orientation"
Materials Transactions, Vol.62 (2021), 975-981.

[14] T. Sakamaki, M. Tanaka, T. Morikawa, H. Nako, S. Nanba
"Brittle-to-ductile transition in martensite - bainite steel"
ISIJ International, Vol.61 (2021), 2167-2175.

[15] T. Suzuki, M. Tanaka, T. Morikawa, Y. Okuyama, J. Fujise, T. Ono
"Tensile deformation of Si single crystals at high temperatures"
Materials Science Forum, Vol.1016 (2021), 1443-1447.

[16]* Z. Gao, Y.Zhao , J.-M. Park, A-H. Jeon, K. Murakami , S. Komazaki, K. Tsuchiya , U. Ramamurty , J.-I. Jang
"Decoupling the roles of constituent phases in the strengthening of hydrogenated nanocrystalline dual-phase high-entropy alloys"
Scripta Materialia, Vol.210 (2022), 114472.

[17]* D.-H. Lee, Z. Gao, J.-M. Park, Y. Zhao , J.-Y. Suh, Eric A. Jagle, K. Tsuchiya, U. Ramamurty, J.-I. Jang
"Nanomechanical and microstructural characterization on the synergetic strengthening in selectively laser melted austenitic stainless steel"
Scripta Materialia, Vol.209 (2022), 114359.

[18]* H. Watanabe, T. Murata, N. Ikeo, T. Mukai, K. Han, K. Tsuchiya
"Effect of initial microstructure on grain refinement under hot compression in CrMnFeCoNi high-entropy alloy with Al addition"
Materialia, Vol.18 (2021), 101172.

[19]* Y. Zhao, J.-M. Park , K. Murakami , S. Komazaki , M. Kawasaki , K. Tsuchiya, J.-Y. Suh , U. Ramamurty , J.-I. Jan
"Exploring the hydrogen absorpition and strengthening behavior in nanocrystalline face-centered cubic high-entropy alloys"
Scripta Materiallia, Vol.203 (2021), 114069.

[20]* H. Watanabe, T. Murata, S. Nakamura, N. Ikeo, T. Mukai, K. Tsuchiya
"Effect of cold-working on phase formation during heat treatment in CrMnFeCoNi system high-entropy alloys with Al addition"
Journal of Alloys and Compounds, Vol.872 (2021), 159668.

[21]* A. Singh, T. Hiroto, H. Watanabe, N. Ikeo, T. Mukai, K. Tsuchiya
"Phase transformation and morphological features in a cold-worked CrMnFeCoNi high entropy alloy with Al addition"
Materials Characterization, Vol.182 (2021), 111556.

[22]* H. Somekawa, J. Yi, A. Singh, K. Tsuchiya
"Microstructural evolution via purity grade of magnesium produced by high-pressure torsion"
Materials Science and Engineering A, Vol.823 (2021), 141735.

[23]* Z. Liu, N. Sato, W. Gao, K. Yubuta, N. Kawamoto, M. Mitome, K. Kurashima, Y. Owada, K. Nagase, C.-H. Lee, J. Yi, K. Tsuchiya, T. Mori
"Demonstration of ultrahigh thermoelectric efficiency of ~7.3% in Mg₃Sb₂/MgAgSb module for low temperature energy harvesting"
Joule, Vol.5 (2021), 1-13.

A01イ

[1]* J. Jiang, Z. Lu, J. Shen, T. Wada, H. Kato, M. Chen
"Decoupling between calorimetric and dynamical glass transitions in high-entropy metallic glasses"
Nature Communications, Vol.12(1) (2021), 3843.

[2]* L. Pao, I. Muto, Y. Sugawara
"Pitting at inclusions of the equiatomic CoCrFeMnNi alloy and improving corrosion resistance by potentiodynamic polarization in H₂SO₄"
Corrosion Science, Vol.191 (2021), 109748. 
 
[3]* T. Aiso, M. Nishimoto, I. Muto, Y. Sugawara
"Roles of Alloying Elements in the Corrosion Resistance of Equiatomic CoCrFeMnNi High-Entropy Alloy and Application to Corrosion-Resistant Alloy Design"
Materials Transactions, Vol.62 (2021), 1677-1680.

[4]* W.K Tan, T. Kuwana, A. Yokoi, G. Kawamura, A. Matsuda, H. Muto
"Electrostatically assembled SiC–Al₂O₃ composite particles for direct selective laser sintering"
Advanced Powder Technology, Vol.32 (2021), 2074. 

[5] T. Akatsu, Y. Umehara, Y. Shinoda, F. Wakai, H. Muto
"Mechanical properties of alumina matrix composite reinforced with carbon nanofibers affected by small interfacial sliding shear stress"
Ceramics International, Vol.48 (2022), 8466-8472.　

[6] H.-L. Yi, D. Wei, R.-Y. Xie, Y.-F. Zhang, H. Kato
"A strategy for enhancing the mechanical property of the precipitation-strengthened medium-entropy alloy"
Materials Science and Engineering: A, Vol.819 (2021), 141390. 

[7]J. Lee, J. Moon, J.W. Bae, J.M. Park, H. Kwon, H. Kato, H.S. Kim
"Temperature- and strain-dependent thermally-activated deformation mechanism of a ferrous medium-entropy alloy"
Intermetallics, Vol.134 (2021), 107202. 　　　　
   
[8]W. Zhang, P. Yang, Y. Cao, X. Li, D. Wei, H. Kato, Z. Wu
"New Ti/β-Ti alloy laminated composite processed by powder metallurgy: Microstructural evolution and mechanical property"
Materials Science and Engineering A, Vol.8223 (2021), 141702. 　　　　

[9]M. Mokhtari, C. Le Bourlot, J. Adrien, A. Bonnin, W. Ludwig, P.-A. Geslin, T. Wada, J. Duchet-Rumeau, H. Kato, E. Maire
"In situ observation of liquid metal dealloying and etching of porous FeCr by X-ray tomography and X-ray diffraction"
Materialia, Vol.18 (2021), 101125. 　　　

[10]K. Shimokawa, T. Furuhashi, T. Kawaguchi, W.-Y. Park, T. Wada, H. Matsumoto, H. Kato, T. Ichitsubo
"Electrochemically synthesized liquid-sulfur/sulfide composite materials for high-rate magnesium battery cathodes"
Journal of Materials Chemistry A, Vol.9(30) (2021), 16585–16593. 　　

[11]S.-H. Joo, I.V. Okulov, H. Kato
"Unusual two-step dealloying mechanism of nanoporous TiVNbMoTa high-entropy alloy during liquid metal dealloying"
Journal of Materials Research and Technology, Vol.14 (2021), 2945-2953. 　　　

[12]S.-H. Joo, H. Kato, I.V. Okulov
"Evolution of 3D interconnected composites of high-entropy TiVNbMoTa alloys and Mg during liquid metal dealloying"
Composites Part B: Engineering, Vol.222 (2021), 109044. 　　

[13]F. Haftlang, P. Asghari-Rad, J. Moon, S. Lee, H. Kato, H.S. Kim
"Superior phase transformation-assisted mechanical properties of a metastable medium-entropy ferrous alloy with heterogeneous microstructure"
Materials Letters, Vol.302 (2021), 130391. 　　　
    
[14]Y.B. Jeong, T. Wada, S.-H. Joo, J.-M. Park, J. Moon, H.S. Kim, I.V. Okulov, S.H. Park, J.H. Lee, K.B. Kim, H. Kato
"Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying"
Composites Part B: Engineering, Vol.225 (2021), 109266. 　　　

[15]Y.B. Jeong, T. Wada, S.-H. Joo, J.-M. Park, H.S. Kim, I.V. Okulov, K.B. Kim, H. Kato
"Hierarchical heterostructured FeCr-(Mg-Mg₂Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying"
Journal of Materials Research and Technology, Vol.15 (2021), 4573-4579. 　　　

[16]H. Kwon, P. Sathiyamoorthi, G.M. Karthik, P. Asghari-Rad, A. Zargaran, H.-S. Do, B.-J. Lee, H. Kato, H.S. Kim 
"2.3 GPa cryogenic strength through thermal-induced and deformation-induced body-centered cubic martensite in a novel ferrous medium entropy alloy"
Scripta Materialia, Vol.204 (2021), 114157. 　　

[17]L. Zhang, Y. Duan, D. Crespo, E. Pineda, T. Wada, H. Kato, J.-M. Pelletier, J. Qiao
"Identifying the high entropy characteristic in La-based metallic glasses"
Applied Physics Letters, Vol.119(52) (2021), 51905. 　　
    
[18]L.T. Zhang, Y.J. Duan, T. Wada, H. Kato, J. M. Pelletier, D. Crespo, E. Pineda, J.C. Qiao
"Dynamic mechanical relaxation behavior of Zr₃₅Hf_17.5Ti_5.5Al_12.5Co_7.5Ni₁₂Cu₁₀ high entropy bulk metallic glass"
Journal of Materials Science & Technology, Vol.83 (2021), 248-255. 　　　

[19]Y.J. Duan, J.C. Qiao, T. Wada, H. Kato, E. Pineda, D. Crespo, Y.J. Wang
"Stress relaxation in high-entropy Pd₂₀Pt₂₀Cu₂₀Ni₂₀P₂₀ metallic glass: Experiments, modeling and theory"
Mechanics of Materials, Vol.160 (2021), 103959. 　　

[20]X. Liang, P. Sharma, Y. Zhang, H. Kato
"Nanoimprinting of magnetic FeCo-based metallic glass thin films"
Journal of Magnetism and Magnetic Materials, Vol.512 (2022), 168455. 　　　

[21]和田 武, 加藤秀実
"金属溶湯脱成分によるポーラス金属開発"
粉体および粉末冶金, Vol.19(1) (2022), 27-33. 　　

[22]D. Wei, L. Wang, Y. Zhang, W. Gong, T. Tsuru, I. Lobzenko, J. Jiang, S. Harjo, T. Kawasaki, J.W. Bae, W. Lu, Z. Lu, Y. Hayasaka, T. Kiguchi, N.L. Okamoto, T. Ichitsubo, H.S. Kim, T. Furuhara, E. Ma, H. Kato
"Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys"
Acta Materialia, Vol.225 (2022), 117571.　　

[23]A. Takeuchi, T. Wada
"Os-Free Fe₁₂Ir₂₀Re₂₀Rh₂₀Ru₂₈ High-Entropy Alloy with Single hcp Structure Including Fe from Late Transition Metals"
Materials Transactions, Vol.63(1) (2022), 7-15　　　

A01公募

[1]*N. Hashimoto and Y. Ono
"Mobility of point defects in CoCrFeNi-base High Entropy Alloys"
Intermetallics, Vol.133 (2021), 107182. 

[2]*Peng Bi, N. Hashimoto, S. Hayashi, H. Oka, S. Isobe
"Oxidation behavior of Cu-containing Concentrated Solid Solution Alloys under Steam Conditions"
Materials Transactions, Vol.62 12 (2021), 1716-1723.　

[3]N. Radenahmad, R. Khezri, A. A. Mohamad, M. T. Nguyen, T. Yonezawa, A. Somwangthanaroj, and S. Kheawhom
"Highly Stable Rechargeable Zinc-ion Battery using Dimethyl Sulfoxide Electrolyte"
Materials Today Energy, Vol.21 (2021), 100738.　　

[4]*M. Zhu, M. T. Nguyen, Y.-t. R. Chau, L. Deng, and T. Yonezawa
"Pt/Ag Solid Solution Alloy Nanoparticles in Miscibility Gap Synthesized by Co-Sputtering onto Liquid Polymer"
Langmuir, Vol.37(19) (2021), 6096-6105.　

[5]S. Zhu, M. T. Nguyen, and T.Yonezawa
"Micro and Nano Encapsulated Metal and Alloy Based Phase Change Materials for Thermal Energy Storage"
Nanoscale Advances, Vol.3(16) (2021), 4626-4645.　

[6]N. Radenahmad, R. Khezri, A. A. Mohamad, M. T. Nguyen, T. Yonezawa, A. Somwangthanaroj, S. Kheawhom
"A durable rechargeable zinc-air battery via self-supported MnO_x-S air electrode"
Journal of Alloys and Compounds, Vol.883 (2021), 160935 (11 pages).

[7]N. Jaikrajang, W. Kao-Ian, T. Muramatsu, R. Chanajaree, T. Yonezawa, Z. Y. Al Balushi, S. Kheawhom, and R. Cheacharoen
"Impact of Binder Functional Groups on Controlling Chemical Reactions to Improve Stability of Rechargeable Zinc-Ion Batteries"
ACS Applied Energy Materials, Vol.4(7) (2021), 7138-7147.

[8]M. Etesami, A. A. Mohamad, M. T. Nguyen, T. Yonezawa, R. Pornprasertsuk, A. Somwangthanaroj, and S. Kheawhom
"Benchmarking superfast electrodeposited bimetallic (Ni, Fe, Co, and Cu) hydroxides for oxygen evolution reaction"
Journal of Alloys and Compounds, Vol.889 (2022), 161738.

[9]M. Gopalakrishnan, A. A. Mohamad, M. T. Nguyen, T. Yonezawa, J. Qin, P. Thamyongkit, A. Somwangthanaroj, and S. Kheawhom
"Recent advances in oxygen electrocatalysts based on tunable structural polymers"
Materials Today Chemistry, Vol.23 (2022), 100632.

[10]*M. T. Nguyen, L. Deng, and T. Yonezawa
"Control of nanoparticles synthesized via vacuum sputter deposition onto liquid: a review"
Soft Matter, Vol.18(1) (2022), 19-47.

[11]K. Narita, Y. Ishida, S. Nukui, Z. Huang, T. Yonezawa
"Surface Menshutkin SN₂ Reaction on Basic Gold Clusters Provides Novel Opportunities for the Cationization and Functionalization of Molecular Metal Clusters"
The Journal of Physical Chemistry Letters, Vol.12 (2021), 11761-11765.

[12]M. Nishimoto, R. Tokura, M. T. Nguyen, and T. Yonezawa
"Copper Materials for Low Temperature Sintering"
Materials Transactions, Vol.63 (2022), 663-675.

[13]H. Liu, K. Ikeda, M. T. Nguyen, S. Sato, N. Matsuda, H. Tsukamoto, T. Tokunaga, and T. Yonezawa
"Alginate-stabilized Gold Nanoparticles Prepared in Microwave-induced Plasma in Liquid Process with Long-term Storage Stability for Potential Biomedical Applications"
ACS Omega, Vol.7 (2022), 6238–6247.

[14]M. J. Saw, M. T. Nguyen, Y. Kunisada, T. Tokunaga, and T. Yonezawa
"Anisotropic Growth of Copper Nanorods Mediated by Cl^– ions"
ACS Omega, Vol.7 (2022), 7414–7420.

[15]K. Ikeda, H. Liu, N. Miyamoto, M. T. Nguyen, H. Shirato, and T. Yonezawa
"Preparation of Biopex®-supported gold nanoparticles as a potential fiducial marker for image-guided radiation therapy"
ACS Applied Bio Materials, Vol.5 (2022), 1259–1266.

[16]*Hisanori Tanimoto, Ryo Hozumi, and Mari Kawamura
"Electrical resistivity and short-range order in rapid-quenched CrMnFeCoNi high-entropy alloy"
J. Alloys and Compounds, Vol.896 (2022), 163059 (6 pages). 

[17]*Y. Komatsu, R.Shimizu, R. Sato, M. Wilde, K. Nishio, T. Katase, D. Matsumura, H. Saitoh, M. Miyauchi, J. Adelman, R. McFadden, D. Fujimoto, J. Ticknor, M. Stachura, I. McKenzie, G. Morris, W. Macfarlane, J. Sugiyama, K. Fukutani, S. Tsuneyuki, T. Hitosugi
"Repeatable Photoinduced Insulator-to-Metal Transition in Yttrium Oxyhydride Epitaxial Thin Films"
Chem. Mater., Vol.34 (2022), 3616–3623.

[18]K. Wang, K. Nishio, K. Horiba, M. Kitamura, K. Edamura, D. Imazeki, R. Nakayama, R. Shimizu, H. Kumigashira, and T. Hitosugi
"Synthesis of High-Entropy Layered Oxide Epitaxial Thin Films: LiCr_1/6Mn_1/6Fe_1/6Co_1/6Ni_1/6Cu_1/6O₂"
Crystal Growth and Design, Vol.22 (2022), 1116-1122.

[19]*T. Nagase, M. Todai, P. Wang, S.-H. Sun, T. Nakano
"Design and Development of (Ti, Zr, Hf)-Al based Medium Entropy Alloys and High Entropy Alloys"
Materials Chemistry and Physics, Vol.276 (2022) , 125409.

[20]*永瀬丈嗣, 田村卓也
"銅(Cu)を含む3d遷移金属ハイエントロピー合金の凝固組織"
日本銅学会誌・銅と銅合金, Vol.60 (2021), 167-175.

[21]*Y. Iijima, T. Nagase, A. Matsugaki, P. Wang, K. Ameyama, T. Nakano
"Fabrication of the Casting Products in Cu-Zn-Mn-Ni Medium-Entropy Brasses "
Materials & Design, Vol.202 (2021), 109548.

[22]*Y. Iijima, T. Nagase, A. Matsugaki, P. Wang, K. Ameyama, T. Nakano
"Design and development of Ti-Zr-Hf-Nb-Ta-Mo High-Entropy Alloys for Metallic Biomaterials"
Materials & Design, Vol.202 (2021), 109548.

[23]T. Ishimoto, R. Ozasa, K. Nakano, M. Weinmann, C. Schnitter, M. Stenzel, A. Matsugaki, T. Nagase, T. Matsuzaka, M. Todai, H. S. Kim, T. Nakano
"Development of TiNbTaZrMo bio–high entropy alloy (BioHEA) super–solid solution by selective laser melting, and its improved mechanical property and biocompatibility"
Scripta Materialia, Vol.194 (2021), 113658.

[24]H.Y. Yasuda, Y. Yamada, K. Cho, T. Nagase
"Deformation behavior of HfNbTaTiZr high entropy alloy single crystals and polycrystals"
Materials Science and Engineering A, Vol.809 (2021), 140938.

[25]M. Yamaguchi, S. Iwamura, K.Mine, H. Murakawa, N. Hanasaki and M. Matsuda
"An electrically conducting molecular crystal composed of a magnetic iron (III) complex (S = 1/2) with a large aromatic ligand, 1,2-naphthlalocyanine (C_4h isomer): towards the development of molecular spintronics"
Dalton Transactions, Vol.50 (2021), 5789. 

[26]*K. Tsuruda, K. Nakagawa, M.Ochi, K. Kuroki, M. Tokunaga, H. Murakawa, N. Hanasaki, and H. Sakai
"Enhancing Thermopower and Nernst Signal of High-Mobility Dirac Carriers by Fermi Level Tuning in the Layered Magnet EuMnBi₂"
Advanced Functional Materials, Vol.2021 (2021), 2102275.

[27]*M. Kondo, M. Ochi, T.Kojima, R. Kurihara, D. Sekine, M. Matsubara, A. Miyake, M. Tokunaga, K. Kuroki, H. Murakawa, N. Hanasaki, and H. Sakai
"Tunable spin-valley coupling in layered polar Dirac metals"
Communications Materials, Vol.2 (2021), 49.

[28]H.Nishiyama, H.Sakai, K.Nakagawa, N.Hanasaki, S.Ishiwata, H.Masuda, M.Ochi, K.Kuroki, S.Iguchi, T.Sasaki, Y.Ikemoto, T.Moriwaki, K.Ueda, Y.Tokura, and J.Fujioka
"Variation of charge dynamics upon antiferromagnetic transitions in the Dirac semimetal EuMnBi₂"
Physical Review B, Vol.104 (2021), 115111.

[29]*N.Hanasaki, M.Oda, K.Niitsu, K.Ehara, H.Murakawa, H.Sakai, H.Nitani, H.Abe, H.Sagayama, H.Uetsuka, T.Karube, and H.Inui
"Element dependence of local disorder in medium-entropy alloy CrCoNi"
AIP advances, Vol.11 (2021), 125216.

[30]*T. Teramoto, M. Narasaki, K. Tanaka
"Experimental determination of effective atomic radii of constituent elements in CrMnFeCoNi high-entropy alloy"
Phil. Mag. Lett., Vol.102 (2022), 100-110.

[31]N. Tarutani, R. Sato, W. Yamazaki, K. Katagiri, K. Inumaru, T. Ishigaki
"Interconnection of Organic–Inorganic Hybrid Nano-Building Blocks Towards Thermally Robust Mesoporous Structures"
Nanoscale, Vol.13 (2021), 11446.

[32]*T. Mitobe, K. Hoshi, Md. R. Kasem, R. Kiyama, H. Usui, A. Yamashita, R. Higashinaka, T. D Matsuda, Y. Aoki, Y. Goto, Y. Mizuguchi
"Superconductivity in In-doped AgSnBiTe₃ with possible band inversion"
Sci. Rep., Vol.11 (2021), 22885.

[33]*K. Hoshi, R. Kurihara, Y. Goto, M. Tokunaga, Y. Mizuguchi
"Extremely high upper critical field in BiCh₂-based (Ch: S and Se) layered superconductor LaO_0.5F_0.5BiS_2-xSe_x (x = 0.22 and 0.69)"
Sci. Rep., Vol.12 (2022), 288.

[34]A. Yamashita, Y. Goto, A. Miura, C. Moriyoshi, Y. Kuroiwa, Y. Mizuguchi
"n-Type thermoelectric metal chalcogenide (Ag, Pb, Bi)(S, Se, Te) designed by multi-site-type high-entropy alloying"
Mater. Res. Lett., Vol.9 (2021), 366.

[35]F. I. Abbas, A. Yamashita, K. Hoshi, R. Kiyama, Md. R. Kasem, Y. Goto, Y. Mizuguchi
"Investigation of lattice anharmonicity in thermoelectric LaOBiS_2-xSe_x through Gruneisen parameter"
Appl. Phys. Express, Vol.14 (2021), 071002.

[36]J. Lee, M. Nagao, Y. Mizuguchi, J. Ruff
"Direct observation of an incommensurate charge density wave in the BiS₂-based superconductor NdO_1-xF_xBiS₂"
Phys. Rev. B, Vol.103 (2021), 245120.

[37]S. S. Philip, A.Athauda, Y. Goto, Y. Mizuguchi, D. Louca
"Out-of-Plane Sulfur Distortions in the Bi₄O₄S₃ Superconductor"
Condens. Matter, Vol.6 (2021) 48.

[38]M Kasem, A Yamashita, T Hatano, Y Goto, O Miura, Y Mizuguchi
"Anomalous broadening of specific heat jump at T_c in high-entropy-alloy-typesuperconductor TrZr₂"
Supercond. Sci. Technol., Vol.34 (2021), 125001.

[39]T. Kawaguchi, K. Kitagawa, K. Toyota, M. Kozaki, K. Okada, N. Nakashima, T. Yatsuhashi
"Smallest Organic Tetracation in the Gas Phase: Stability of Multiply Charged Diiodoacetylene Produced in Intense Femtosecond Laser Fields"
The Journal of Physical Chemistry A, Vol.125 (2021), 8014-8024.

[40]*Z. X. Cai, H. Goou, Y. Ito, T. Tokunaga, M. Miyauchi, H. Abe, T. Fujita
"Nanoporous ultra-high-entropy alloys containing fourteen elements for water splitting electrocatalysis"
Chemical Science, Vol.12 (2021), 11306-11315. 

A02ウ

[1]*T. Tsuru, I. Lobzenko, D. Wei
"Synergetic effect of Si addition on mechanical properties in face-centered-cubic high entropy alloys: A first-principles study"
Model. Simul. Mater. Sci. Eng., Vol.30 (2022) , 024003. 　　

[2]*P. Yu, J.-P. Du, S. Shinzato, F.-S. Meng, S. Ogata
"Theory of history-dependent multi-layer generalized stacking fault energy— A modeling of the micro-substructure evolution kinetics in chemically ordered medium-entropy-alloys"
Acta Materialia, Vol.224 (2022), 117504-1-12.　　 

[3]*T. Tsuru, M. Itakura, M. Yamaguchi, C. Watanabe, H. Miura
"Dislocation core structure and motion in pure titanium and titanium alloys: A first-principles study"
Computational Materials Science, Vol.203 (2022), 111081.　　　

[4]*D. Wei, L. Wang, Y. Zhang, W. gong, T. Tsuru, I. Lobzenko, J. Jiang, S. Harjo, T. Kawasaki, J. W. Bae, W. Lu, Z. Lu, Y. Hayasaka, T. Kiguchi, N. L. Okamoto, T. Ichitsubo, H. S. Kim, T. Furuhara, E. Ma, H. Kato
"Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys"
Acta Materialia, Vol.225 (2022), 117571.　　　

[5]*Y. Shiihara, R. Kanazawa, D. Matsunaka, I. Lobzenko, T. Tsuru, M. Kohyama, H. Mori
"Artificial neural network molecular mechanics of iron grain boundaries"
Scripta Materialia, Vol. 207(2022), 114268.　　　

[6]*S. Sugie and K. Yuge
"Tropical Diagram for Linear-Nonlinear Boundary in Canonical Ensemble"
arXiv : 2110.08948.     

[7]*K. Yuge
"Nonlinearity in Canonical Ensemble for Multicomponent Alloys Revisited from Structural Degree of Freedoms"
J. Phys. Soc. Jpn. Vol.91 (2021), 014082-1-5.　

[8]*H. Xie, G. Wei, Y. Lua, J. Du, F. Yin, G.-H. Lu, S. Ogata
"Driving force of zero-macroscopic-strain deformation twinning in face-centered-cubic metals"
Philosophical Magazine, Vol.101-21 (2021), 2318-2330.     

[9]*Q. Chen, J. Zhang, Z. Liu, Y. Wang, Y. Ootani, J. Xu, N. Ozawa, M. Kubo
"Heterogeneous yielding mechanisms of body centered cubic iron for high resistance to chemical reaction-induced deterioration in supercritical water environments: A reactive molecular dynamics study"
Scripta Materialia, Vol.202 (2021), 113997.      

[10]*R. P. Campos, S. Shinzato, A. Ishii, S. Nakamura, S. Ogata
"Database-driven semigrand canonical Monte Carlo method: Application to segregation isotherm on defects in alloys"
Physical Review E, Vol.104 (2021), 025310-1-15.    

[11]*Z. Shen, J.-P. Du, S. Shinzato, Y. Sato, P. Yu, S. Ogata
"Kinetic Monte Carlo simulation framework for chemical short-range order formation kinetics in a multi-principal-element alloy"
Computational Materials Science, Vol.198 (2021), 110670-1-8.      

[12]*W. Lin, D. Chen, C. Dang, P. Yu, F. Meng, T. Yang, Y. Zhao, S. Liu, J. Du, G. Yeli, C.-T. Liu, Y. Lu, S. Ogata, J. Kai
"Highly pressurized helium nanobubbles promote stacking-fault-mediated deformation in FeNiCoCr high entropy alloy"
Acta Materialia, Vol.210 (2021), 116843-1-11.      
 
[13]*S. Ohta, R. Miyake and K. Yuge
"Configurational Geometry Bridges Equilibrium Structure Information from a Single to Multiple Compositions for Binary Discrete Systems"
J. Phys. Soc. Jpn. Vol.90 (2021), 034801-1-4.    

[14]*栗原健輔, 芹澤 愛, I Lobzenko, 都留智仁
"Al-Mg-Si系合金におけるナノクラスタの形成に対する溶質原子と空孔の局所的結合の影響"
軽金属．  

[15]下川智嗣, 原 一輝, 新山友暁
"異なる塑性変形モードの相乗効果: 結晶・非晶質混在系の強度に対する分子動力学法による解析"
材料

[16]H.Liao, H.Kimizuka, A. Ishii, J.-P. Du, S. Ogata
"Nucleation kinetics of the β’’ precipitate in dilute Mg–Y alloys: A kinetic Monte Carlo study"
Scripta Materialia, Vol.210 (2022), 114480-1-4.       

[17]H. Miura, C. Watanabe, Y. Aoyagi, Y. Oba, M. Kobayashi, N. Yoshinaga
"Age-hardening Mechanisms of Heterogeneous-Nanostructured SUS316LN Stainless Steel Fabricated by Heavy Cold Rolling"
Materials Science and Engineering: A, Vol.833 (2022), 142531.    

[18]S.-M. Liu, A. Ishii, S.-B. Mi, S. Ogata, J. Li, W.-Z. Han
"Dislocation-Mediated Hydride Precipitation in Zirconium"
Small, Vol.18 (2022), 2105881-1-8.     

[19]S. Zheng, S. Shinzato, S. Ogata, S.X. Mao
"Experimental molecular dynamics for individual atomic-scale plastic events in nanoscale crystals"
Journal of the Mechanics and Physics of Solids, Vol.158 (2022), 104687-1-16.   

[20]X. Wang, S. Zheng, S. Shinzato, Z. Fang, Y. He, Li Zhong, C. Wang, S. Ogata, S.X. Mao
"Atomistic processes of surface-diffusion-induced abnormal softening in nanoscale metallic crystals"
Nature Communications, Vol.12 (2021), 5237-1-9.     

[21]Y.-J. Hu, A. Sundar, S. Ogata, L. Qi
"Screening of generalized stacking fault energies, surface energies and intrinsic ductile potency of refractory multicomponent alloys"
Acta Materialia, Vol.210 (2021), 116800-1-20.    

[22]H. Jiang, C. Watanabe, Y. Miyajima, N. Koga, Y. Aoyagi, M. Kobayashi, H. Miura
"Effects of Strain Rate on Mechanical Properties of Heterogeneous Nano-Structured SUS316LN Stainless Steel: Revealed by In-Situ X-Ray Diffraction at Synchrotron Radiation Facility"
Materials Science and Engineering: A, Vol.815 (2021), 141251.      

A02エ

[1]*T. Koyama, Y. Tsukada and T. Abe
"Simple approach for evaluating the possibility of sluggish diffusion in high-entropy alloys"
J. Phase Equilib. Diffus., Vol.43 (2022), 68-77.   

[2]X. Wang, Y. Zhao, S. Zeng, Z. Wang, Y. Chen and J. Ni
"Cubic halide perovskites as potential low thermal conductivity materials: A combined approach of machine learning and first-principles calculations"
Physical Review B, Vol.105 (2022), 014310 (11 pp).        

[3]T. Davey and Y. Chen
"The effect of oxygen impurities on the stability and structural properties of vacancy-ordered and -disordered ZrCx"
RSC Ad, Vol.12 (2022), 3198-3215.      

[4]K. Terayama, K. Han, R. Katsube, I. Ohnuma, T. Abe, Y. Nose, R. Tamura
"Acceleration of phase diagram construction by machine learning incorporating Gibbs’ phase rule"
Scripta Materialia, Vol.208 (2022), 114335.     

[5]*N-D. Tran, A. Saengdeejing, K. Suzuki, H. Miura, Y. Chen
"Stability and Thermodynamics Properties of CrFeNiCoMn/Pd High Entropy Alloys from First Principles"
J. Phase Equilib. Diffus., Vol.42 (2021), 606-616.    

[6]A. Saengdeejing and Y. Chen
"Improving Thermodynamic Stability of SmFe12-Type Permanent Magnets from High Entropy Effect"
J. Phase Equilib. Diffus., Vol.42 (2021), 529-605.      

[7]T. Davey, K. Suzuki, H. Miura and Y. Chen
"Stability and structural properties of vacancy-ordered and-disordered ZrCx"
RSC Ad, Vol.11 (2021), 32573 –32589.    

[8]T. Abe, M. Morishita, Y. Chen, A. Saengdeejing, K. Hashimoto, Y. Kobayashi, I. Ohnuma, T. Koyama and S. Hirosawa
"Development of a prototype thermodynamic database for Nd-Fe-B permanent magnets"
Science and Technology of Advanced Materials, Vol.22 (2021), 557-570.    

[9]J. Wang, X.C. Jianxin, H.H. Wang, Z. Lu and Y. Chen
"The bonding variation of c-TiAl during deformation"
Phys. Chem. Chem. Phys., Vol.23 (2021), 3905-3914.     

[10]榎木勝徳, 高橋宏太, 三富崇永, 大谷博司
"鉄鋼における熱力学物性値の電子論計算とFe-Mo-B三元系理論状態図への応用"
鉄と鋼, Vol.107(11) (2021),  923-933.    
 
[11]A. Saengdeejing, Y. Chen, O. Takeda, M. Enoki, S. Sugimoto, H. Ohtani, and A. Taichi
"Sm–Ti binary thermodynamic database and phase diagram."
Calphad, Vol.75 (2021), 102357.     

[12]*H.G. Li, J.J. Ruan, N. Ueshima, K. Oikawa
"Investigation on the σ-phase-related equilibria in Cr-Mn-Co system"
J. Alloys and Compunds, Vol.867 (2021), 159024. 　　　

[13]*J.J. Ruan, N. Ueshima,  H.G. Li, K. Oikawa
"Phase equilibria, martensitic transformations and deformation behaviors of the subsystem of Cantor alloy－low-cost Fe-Mn-Cr alloys"
Materialia, Vol.20 (2021), 101231.
 
[14]*T. Abe
"Effect of Short-Range Ordering in High-Entropy Alloys"
Materials Transactions, Vol.62 (2021), 711-718. 　　　　　　　　　

[15]*H. Watanabe, T. Murata, N. Ikeo, T. Mukai, K. Han, K. Tsuchiya
"Effect of initial microstructure on grain refinement under hot compression in CrMnFeCoNi high-entropy ally with Al addition"
Materialia, Vol.18 (2021), 101172.　　　

[16]K. Han, I. Lee, I. Ohnuma, R. Kainuma
"Formation and growth behavior of intermetallic compound phases in the interfacial reaction of solid Fe / liquid Zn at 450 oC"
J. Alloys and Compd, Vol.888 (2021), 161562.　　　

[17]K. Okuda,  K. Han, R. Kainuma
"Recrystallization Behavior of IF steel at the Interface of Al junction"
Tetsu-to-Hagane, Vol.107 (2021), 345-355.　　　　

[18]T. Omori, K. Ando, I. Ohnuma, R.Kainuma, K.Ishida
"BCC-HCP-FCC Multiple Transformations and ε Loop in the Fe-Cr-Co-Mn System"
J Phase Equilib. Diff., Vol.42 (2021), 735-747.　　　

[19]I. Lee, K. Han, I. Ohnuma, R. Kainuma
"Experimental determination of phase diagram at 450 °C in the Zn–Fe–Al ternary system"
J. Alloys and Compd, Vol.854 (2021), 157163.　　

[20]*Y. Matsuura, Y. Tsukada, T. Koyama
"Adjoint model for estimating material parameters based on microstructure evolution during spinodal decomposition"
Physical Review Materials, Vol.5 (2021), 113801. 

[21]*T. Koyama, Y. Tsukada
"Ludwig-Soret effect formulated from the grain-boundary-phase model"
Calphad, Vol.73 (2021), 102269.　　　

A02公募

[1]*Y. Shiihara, R. Kanazawa, D. Matsunaka, I. Lobzenko, T. Tsuru, M. Kohyama
"Artificial neural network molecular mechanics of iron grain boundaries"
Scripta Materialia, Vol.207 (2021), 114268. 

A03オ

[1]*K. Inoue, S. Yoshida, N. Tsuji
"Direct observation of local chemical ordering in a few nanometer range in CoCrNi medium-entropy alloy by atom probe tomography and its impact on mechanical properties"
Physical Review Materials, Vol.5 (2021), No.085007.　　　

[2]*A. Lozinko, R. Gholizadeh, Y. Zhang, U. Klement, N. Tsuji, O.V. Mishin, S. Guo
"Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi_2.1 eutectic high-entropy alloy"
Materials Science and Engineering A, Vol.833 (2022), No.142558.　　

[3]*Y.Iijima, T.Nagase, A.Matsugaki, P.Wang, K.Ameyama, T.Nakano
"Design and development of Ti-Zr-Hf-Nb-Ta-Mo High-Entropy Alloys for Metallic Biomaterials Materials and Design"
Materials & Design, Vol.202 (2021), 109548.　　　

[4]*G.Li, M.Liu, S.Lyu, M.Nakatani, R.Zheng, C.Ma, Q.Li, K.Ameyama
"Simultaneously enhanced strength and strain hardening capacity in FeMnCoCr high-entropy alloy via harmonic structure design"
Scripta Materialia, Vol.191 (2021), 196–201.　　　

[5]N.N.Mahmud, A.B.Sulong, B.Sharma, K.Ameyama
"Pre-sintered Titanium-Hydroxyapatite Composite Fabricated via PIM Route"
Metals, Vol.11 (2021), 318.　　

[6]N.N.Mahmud, F. A.A.Azam, M.I.Ramli, F.M.Foudzi, K.Ameyama, A.B.Sulong
"Rheological properties of irregular-shaped Titanium-Hydroxyapatite bimodal powder composite moulded by powder injection moulding"
J. Materials Research and Technology, Vol.11 (2021), 2255-2264.　　

[7]Y.Song, Z.Zhang, H.Ma, M.Nakatani, M.O.Kawabata, K.Ameyama
"Ratcheting Fatigue Behavior of Harmonic Structure Designed SUS316L Stainless Steel"
Metals, Vol.11 (2021), 477.　　

[8]X.Wang, J.Li, K.Ameyama, G.Dirras
"Influence of microstructural features on the yield strength of Ti-6Al-4V: a numerical study by using the crystal plasticity finite element method"
Meccanica, Vol.56 (2021), 1129-1146.　　

[9]T.Sadat, K.Hayashi, G.Haugou, H.Morvan, E.Markiewicz, L.Dubar, M.Bigerelle, K.Ameyama, G.Dirras
"Mechaical properties of SPS-processed pure Ti and Ti-6Al-4V alloys: a comparative study between harmonic and non-harmonic microstructures"
Compounds, Vol.1 (2021), 41-57.　　

[10]X.Li, M.Nakatani, J.Yang, J.Zhang, B.Sharma, H.Pan, K.Ameyama, J.Fang, X.Zhu
"Investigation of mechanical properties and microstructural evolution in Cu-Al alloys with gradient structure"
J. Alloys & Compounds, Vol.890 (2021), 161835.　　　

[11]*ハルヨ ステファヌス, 川崎卓郎, 土田紀之, 諸岡 聡, ゴン ウー
"中性子回折により検討したTRIP鋼におけるオーステナイトの粒応力とマルテンサイト変態の関係"
鉄と鋼, Vol.107 (2021), 887-896. 　　

[12]N. Tsuchida, S. Harjo
"Enhancement of Uniform Elongation by Temperature Change during Tensile Deformation in a 0.2 C TRIP Steel"
Metals, Vol.11 (2021), 2053.　　

[13]XX. Zhang, D. Knoop, H. Andrä, S. Harjo, T. Kawasaki, A. Lutz, M. Lahres
"Multiscale constitutive modeling of additively manufactured Al-Si-Mg alloys based on measured phase stresses and dislocation density"
International Journal of Plasticity, Vol.140 (2021), 102972.　

[14]M. Kumagai, K. Akita, M. Kuroda, S. Harjo
"In situ diffraction characterization on microstructure evolution in austenitic stainless steel during cyclic plastic deformation and its relation to the mechanical response "
Materials Science and Engineering A, Vol.820 (2021), 141582.　　

[15]*M. Naeem, H. Zhou, H. He, S. Harjo, T. Kawasaki, S. Lan, Z. Wu, Y. Zhu, X-L. Wang
"Martensitic transformation in CrCoNi medium-entropy alloy at cryogenic temperature"
Applied Physics Letters, Vol.119 (2021), 131901. 　　　

[16]M. Arai, K.H. Andersen, D.N. Argyriou, W. Schweika, L. Zanini, S. Harjo, T. Kamiyama, M. Harada
"The performance of neutron diffractometers at long and short pulse spallation sources: Comparison between ESS and J-PARC"
Journal of Neutron Research, Vol.23 (2021), 215-232. 　　

[17]*M. Naeem, H. He, S. Harjo, T. Kawasaki, W. Lin, J-J. Kai, Z. Wu, S. Lan, X-L. Wang
"Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy"
Acta Materialia, Vol.221 (2021), 117371. 　

[18]T. Yamashita, N. Koga, T. Kawasaki, S. Morooka, S. Tomono, O. Umezawa, S. Harjo
"Work hardening behavior of dual phase copper–iron alloy at low temperature"
Materials Science and Engineering: A, Vol.819 (2021), 141509. 

[19]S. Nishida, S. Nishino, M. Sekine, Y. Oka, S. Harjo, T. Kawasaki, H. Suzuki, Y. Morii and Y. Ishii
"Analysis of Residual Stress in Steel Bar Processed by Cold Drawing and Straightening"
Materials Transactions, Vol.62 (2021), 667-674. 　　

[20]K.D. Liss, S. Harjo, T. Kawasaki, K. Aizawa, P. Xu
"Anisotropic thermal lattice expansion and crystallographic structure of strontium aluminide within Al-10Sr alloy as measured by in-situ neutron diffraction"
Journal of Alloys and Compounds, Vol.869 (2021), 159232.
 
[21]XX. Zhang, A. Lutz, H. Andrä, M. Lahres, W. Gong, S. Harjo, C. Emmelmann
"Strain hardening behavior of additively manufactured and annealed AlSi3.5Mg2.5 alloy"
Journal of Alloys and Compounds, Vol.898 (2022), 162890. 　　

[22]Y.S. Kim, H. Chae, W. Woo, D.K. Kim, D.H. Lee, S. Harjo, T. Kawasaki, S.Y. Lee
"Multiple deformation scheme in direct energy deposited CoCrNi medium entropy alloy at 210K"
Materials Science and Engineering: A, Vol.828 (2021), 142059. 　　

[23]M-Y. Luo, T-N. Lam, P-T. Wang, N-T. Tsou, Y-J. Chang, R. Feng, T. Kawasaki, S. Harjo, P.K. Liaw, A-C. Yeh, S.Y. Lee, J. Jain, E-W. Huang
"Grain-size-dependent microstructure effects on cyclic deformation mechanisms in CoCrFeMnNi high-entropy-alloys"
Scripta Materialia, Vol.210 (2022), 114459. 　

[24]T-N. Lam, M-Y. Luo, T. Kawasaki, S. Harjo, J. Jain, S.Y. Lee, A-C. Yeh, E-W. Huang
"Tensile Response of As-Cast CoCrFeNi and CoCrFeMnNi High-Entropy Alloys"
Crystals, Vol.12 (2022), 157.　　

[25]*C. Yang, H. Bian, K. Aoyagi, Y. Hayasaka, K. Yamanaka, A. Chiba
"Synergetic strengthening in HfMoNbTaTi refractory high-entropy alloy via disordered nanoscale phase and semicoherent refractory particle"
Materials & Design, Vol.212 (2021), 110248.　　

[26]*J. Li, K. Yamanaka, A. Chiba
"Calculation-driven design of off-equiatomic high-entropy alloys with enhanced solid-solution strengthening"
Materials Science and Engineering A, Vol.817 (2021), 141359.　　

[27]Y. Zhao, Y. Cui, Y. Hasebe, H. Bian, K. Yamanaka, K. Aoyagi, T. Hagisawa, A. Chiba
"Controlling factors determining flowability of powders for additive manufacturing: A combined experimental and simulation study"
Powder Technology, Vol.393 (2021), 482-493.

[28]Y. Cui, Y. Zhao, H. Numata, K. Yamanaka, H. Bian, K. Aoyagi, A. Chiba
"Effects of process parameters and cooling gas on powder formation during the plasma rotating electrode process"
Powder Technology, Vol.393 (2021), 301-311.　　

[29]Q. Wei, G. Luo, R. Tu, J. Zhang, Q. Shen, Y. Cui, Y. Gui, A. Chiba
"High-temperature ultra-strength of dual-phase Re_0.5MoNbW(TaC)_0.5 high-entropy alloy matrix composite"
Journal of Materials Science and Technology, Vol.84 (2021), 1-9.   

[30]T. Lee, K. Aoyagi, H. Bian, K. Yamanaka, S. Sato, A. Chiba
"The microstructure and mechanical properties of selective electron beam melting manufactured 9–12Cr ferritic/martensitic steel using N- and Ar-atomized powder"
Additive Manufacturing, Vol.45 (2021), 102075.    

[31]A. Chiba, Y. Daino, K. Aoyagi, K. Yamanaka
"Smoke suppression in electron beam melting of inconel 718 alloy powder based on insulator–metal transition of surface oxide film by mechanical stimulation"
Materials, Vol.14 (2021), 4662.  

[32]Y. Lei, K. Aoyagi, K. Aota, K. Kuwabara, A. Chiba
"Critical factor triggering grain boundary cracking in non-weldable superalloy Alloy713ELC fabricated with selective electron beam melting"
Acta Materialia, Vol.208 (2021), 116695.  
    
[33] Y. Zhao, Y. Koizumi, K. Aoyagi, K. Yamanaka, A. Chiba
"Thermal properties of powder beds in energy absorption and heat transfer during additive manufacturing with electron beam"
Powder Technology, Vol.381 (2021), 44-54.  

[34]Q. Chen, Y. Zhao, S. Strayer, Y. Zhao, K. Aoyagi, Y. Koizumi, A. Chiba, W. Xiong, A.C. To
"Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experiment"
Additive Manufacturing, Vol.37 (2021), 101642.  

[35]K. Yamanaka, A. Kuroda, M. Ito, M. Mori, H. Bian, T. Shobu, S. Sato, A. Chiba
"Quantifying the dislocation structures of additively manufactured Ti–6Al–4V alloys using X-ray diffraction line profile analysis"
Additive Manufacturing, Vol.37 (2021), 101678.  

A03カ

[1]*F. Sun, G. Miyamoto, Y. Liu, Y. Hayasaka, T. Furuhara
"Phase separation with ordering in aged Fe-Ni-Mn medium entropy alloy"
Acta Materialia, Vol.223 (2022), 117487. 　　

[2]Y. Zhang, G. Miyamoto, T. Furuhara
"Enhanced Hardening by Multiple Microalloying in Low Carbon Ferritic Steels with Interphase Precipitation"
Scripta Materialia, Vol.212 (2022), 114558.　　

[3]G. Miyamoto, Y. Tateyama, T. Uesugi, Y. Hayasaka, T. Furuhara
"Solute cluster - induced precipitation and resultant surface hardening during nitriding of Fe-Al-V alloys"
Scripta Materialia, Vol.203 (2021), 114121.　　　

[4]*K. Inoue, S. Yoshida, N. Tsuji
"Direct observation of local chemical ordering in a few nm range in CoCrNi medium-entropy alloy by atom probe tomography and its impact on mechanical properties"
Phys. Rev. Mater. Vol.5 (2021), 085007.　　

[5]*M. Mizuno, K. Sugita, H. Araki
"Prediction of short-range order in CrMnFeCoNi high-entropy alloy"
Results in Physics, Vol.34 (2022) , 105285.　　

[6]*K. Sugita, R. Ogawa, M. Mizuno, H. Araki, A. Yabuuchi
"Vacancy migration energies in CrMnFeCoNi, CrFeCoNi, and CrFeNi alloys and their effect on atomic diffusion"
Scripta Materialia, Vol.208 (2022), 114339.　　

[7]M. Mizuno, K. Sugita, H. Araki
"Structural Transition of Vacancy–Solute Complexes in Al–Mg–Si Alloys"
Metals, Vol.12 (2022), 2.

[8]K. Sugita, M. Mizuno, H. Araki, Y. Shirai, T. Omura, K. Tomatsu, Y. Sakiyama
"Review of positron lifetime studies of lattice defects formed during tensile deformation in a hydrogen environment"
ISIJ International, Vol.61 (2021), 1056-1063.　　　

[9]*H. Arima-Osonoi, K. Yamazaki, R. Simura, T. Sugawara, K. Yubuta, K. Sugiyama and A. Yoshiasa
"Local structure investigations of Sn and Mn doped in β-Ga₂O₃ by X-ray absorption spectroscopy"
Journal of Crystal Growth, Vol.570 (2021), 126223. 　

[10]*T. Tokuda, Y. Kodama, S. Niiyama, K. Shinoda and K.Sugiyama
"Distribution of Ce in orthophosphate Sr₃(PO₄)₂"
Journal of Crystal Growth, Vol.571 (2021), 126267

[11]*K.Sugiyama, T. Kawamata and T. Kuribayashi
"Structure refinement of prehnite from Passaic County, New Jersey, USA"
Journal of Mineralogical and Petrological Sciences, Vol.116 (2021), 272–276.

[12]K.Shinoda, S. Abe, K.Sugiyama, and Y. Waseda
"The local structure around Ge atoms in Ge-doped magnetite thin films"
High Temperature Materials Processing, Vol.39 (2020), 645–662. 　　

[13]*M. Tokuda, K. Yubuta, T. Shishido and K. Sugiyama
"Redetermination of the crystal structures of rareearth trirhodium diboride RERh₃B₂ (RE = Pr, Nd and Sm) from single-crystal X-ray data"
Acta Crystallographica, E78 (2022), 76-79.

A03公募

[1]D. Ueta, T. Kobuke, H. Shibata, M. Yoshida, Y. Ikeda, S. Itoh, T. Yokoo, T.Masuda, H. Yoshizawa
"Crystalline Electric Field Level Scheme of Non-centrosymmetric CeRhSi₃ and CeIrSi₃"
Journal of the Physical Society of Japan, Vol.90 (2021), 104706.

[2]D. Ueta, M. Yoshida, T. Kobuke, Y. Ikeda, T. Masuda, H. Yoshizawa
"Complex Magnetic Phase Diagram in the Non-Centrosymmetric Compound CePtSi₃"
Journal of the Physical Society of Japan, Vol.90 (2021), 064712.

[3]S. Itoh, T. Masuda, T. Yokoo, H. Yoshizawa, M. Soda, S. Asai, Y. Ikeda, S. Ibuka, M. Yoshida, T. Hawai, H. Saito, D. Kawana, R.Sugiura, T. Asami, Y. Ihata
"Dynamical Studies in Condensed Matter on High Resolution Chopper Spectrometer (HRC) —2nd Phase of HRC Project—"
Proceedings of the 3rd J-PARC Symposium (J-PARC2019): JPS Conf. Proc. Vol.33 (2021), 011058.

[4]D. Ueta, M. Yoshida, T. Kobuke, Y. Ikeda, A.Nakao, T. Moyoshi, K. Munakata, Y. Liu, T. Masuda, H. Yoshizawa
"Oval-cycloidal Magnetic Structure with Phase-shift in the Non-centrosymmetric Tetragonal Compound CePdSi₃"
J. Phys. Soc. Jpn. Vol.90 (2021), 114702. 

[5]*F. Alijania, M. Reihanian, K. Gheisari, K. Edalati, H. Miyamoto
"Effect of homogenization on microstructure and hardness of arc-melted FeCoNiMn high entropy alloy during high-pressure torsion (HPT)"
Journal of Materials Engineering and Performance, Vol.31 (2022), 5080-5089.​​

[6]*H. Shimizu, M. Yuasa, H. Miyamoto, K. Edalati
"Corrosion behavior of ultrafine grained CoCrFeMnNi high-entropy alloys fabricated by high-pressure torsion"
Materials, Vol.15 (2022), 1007.

[7]*R.B. Figueiredo, K. Edalati, T.G. Langdon
"Effect of creep parameters on the steady-state flow stress of pure metals processed by high-pressure torsion"
Materials Science and Engineering A, Vol.835 (2022), 142666.

[8]*S. Akrami, Y. Murakami, M. Watanabe, T. Ishihara, M. Arita, M. Fuji, K. Edalati
"Defective high-entropy oxide photocatalyst with high activity for CO₂ conversion"
Applied Catalysis B, Vol.303 (2022), 120896.

[9]*P. Edalati, A. Mohammadi, Y. Li, H.W. Li, R. Floriano, M. Fuji, K. Edalati
"High-entropy alloys as anode materials of nickel - metal hydride batteries"
Scripta Materialia, Vol.209 (2022), 114387.

[10]*P. Edalati, A. Mohammadi, M. Ketabchi, K. Edalati
"Microstructure and microhardness of dual-phase high-entropy alloy by high-pressure torsion: twins and stacking faults in FCC and dislocations in BCC"
Journal of Alloys and Compounds, Vol.894 (2022), 162413.

[11]*Y. Tang, M. Murayama, K. Edalati, Q. Wang, S. Iikubo, T. Masuda, Y. Higo, Y. Tange, Y. Ohishi, M. Mito, Z. Horita
"Phase transformations in Al-Ti-Mg powders consolidated by high-pressure torsion: experiments and first-principles calculations"
Journal of Alloys and Compounds, Vol.889 (2022), 161815.

[12]*J. González-Masís, J.M. Cubero-Sesin, A. Campos-Quirós, K. Edalati
"Synthesis of biocompatible high-entropy alloy TiNbZrTaHf by high-pressure torsion"
Materials Science and Engineering A, Vol.825 (2021), 141869.

[13]*S. Akrami, M. Watanabe, T.H. Ling, T. Ishihara, M. Arita, M. Fuji, K. Edalati
"High-pressure TiO₂-II polymorph as an active photocatalyst for CO₂ to CO conversion"
Applied Catalysis B, Vol.298 (2021), 120566.

[14]*F. Chu, B. Han, K. Edalati, J. Ma, Y. Meng, C. Wang, F. Yang, P. Zhang, H.J. Lin
"Severe plastic deformed Pd-based metallic glass for superior hydrogen evolution in both acidic and alkaline media"
Scripta Maerialia, Vol.204 (2021), 114145.

[15]*P. Edalati, A. Mohammadi, M. Ketabchi, K. Edalati
"Ultrahigh hardness in nanostructured dual-phase high-entropy alloy AlCrFeCoNiNb developed by high-pressure torsion"
Journal of Alloys and Compounds, Vol.884 (2021), 161101.

[16]*P. Edalati, A. Mohammadi, Y. Tang, R. Floriano, M. Fuji, K. Edalati
"Phase transformation and microstructure evolution in ultrahard carbon-doped AlTiFeCoNi high-entropy alloy by high-pressure torsion"
Materials Letters, Vol.302 (2021), 130368.

[17]*R. Floriano, G. Zepon, K. Edalati, G.L.B.G. Fontana, A. Mohammadi, Z. Ma, H.W. Li, R.J. Contieri
"Hydrogen storage properties of new A₃B₂-type TiZrNbCrFe high-entropy alloy"
International Journal of Hydrogen Energy, Vol.46 (2021), 23757-23766.

[18]*F. Chu, K. Wu, Y. Meng, K. Edalati, H.J. Lin
"Effect of high-pressure torsion on the hydrogen evolution performances of a melt-spun amorphous Fe_73.5Si_13.5B₉Cu₁Nb₃ alloy"
International Journal of Hydrogen Energy, Vol.46 (2021), 25029-25038.

[19]*P. Edalati, X.F. Shen, M. Watanabe, T. Ishihara, M. Arita, M. Fuji, K. Edalati
"High-entropy oxynitride as low-bandgap and stable photocatalyst for hydrogen production"
Journal of Materials Chemistry A, Vol.9 (2021), 15076-15086.

[20]*Y. Tang, K. Edalati, T. Masuda, Y. Takizawa, M. Yumoto, Y. Otagir, Z. Horita
"Grain refinement and superplasticity of Inconel 718 processed by multi-pass high-pressure sliding"
Materials Letters, Vol.300 (2021), 130144.

[21]*K. Wu, F. Chu, Y. Meng, K. Edalati, Q. Gao, W. Li, H.J. Lin
"Cathodic corrosion activated Fe-based nanoglass as a highly active and stable oxygen evolution catalyst for water splitting"
Journal of Materials Chemistry A, Vol.9 (2021), 12152-12160.

[22]*A. Mohammadi, N.A. Enikeev, M.Y. Murashkin, M. Arita, K. Edalati
"Examination of inverse Hall-Petch relation in nanostructured aluminum alloys by ultra-severe plastic deformation"
Journal of Materials Science and Technology, Vol.91 (2021), 78-89.

[23]*A. Mohammadi, N.A. Enikeev, M.Y. Murashkin, M. Arita, K. Edalati
"Developing age-hardenable Al-Zr alloy by ultra-severe plastic deformation: significance of supersaturation, segregation and precipitation on hardening and electrical conductivity"
Acta Materialia, Vol.203 (2021), 116503.