原著論文
2018年
A01ア
[1]Kyosuke Kishida, Takuto Maruyama, Hirotaka Matsunoshita, Takayoshi Fukuyama, Haruyuki Inui
"Micropillar compression deformation of single crystals of Mo5SiB2 with the tetragonal D8l structure"
Acta Mater., Vol.159 (2018), 416-428.
[2]Masaya Higashi, Shogo Momono, Kyosuke Kishida, Norihiko L. Okamoto, Haruyuki Inui
"Anisotropic plastic deformation of single crystals of the MAX phase compound Ti3SiC2 investigated by micropillar compression"
Acta Mater., Vol.161 (2018), 161-170.
[3]*G. Laplanche, N. Wieczorek, F. Fox, S. Berglund, J. Pfetzing-Micklich, K. Kishida, H. Inui, G. Eggeler
"On the influence of crystallography and dendritic microstructure on micro shear behavior of single crystal Ni-based superalloys"
Acta Mater., Vol.160 (2018), 173-184.
[4]Norihiko L. Okamoto, Shota Michishita, Yukichika Hashizume, Haruyuki Inui
"Fracture Toughness of the Fe-Zn Intermetallic Compounds Measured by Bend Testing of Chevron-Notched Single-Crystal Microbeams"
ISIJ International, Vol.58 (2018), 1569-1577.
[5]T. Murakami, A. Korenaga, T. Ohana and H. Inui
"High-Temperature Tribological Properties of Mo-Si-B Intermetallic Alloy/Si3N4 tribopairs"
Intermetallics, Vol.100 (2018), 151-162.
[6]仙石晃大，竹林浩史，岡本範彦，乾 晴行
"ホットスタンプ加熱過程における合金化溶融亜鉛めっき構造の変化 Structural Changes in Galvannealed Coating During Hot-Stamping Heating"
鉄と鋼, Vol.104 (2018), 331-337.
[7]奧山彫夢, 大橋鉄也, 田中將己
"粒子分散強化型合金の微視組織に生ずる2次すべりと巨視的加工硬化特性に関するモデリングと結晶塑性解析"
鉄と鋼, Vol.104 (2018), 166-176.
[8]河野義樹, 大橋鉄也, 眞山 剛, 田中將己, 坂本盛敬, 奧山彫夢, 佐藤満弘
"EBSD-FEM データ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析"
機械学会論文集, Vol.84 (2018), 17-00559.
[9]Y. Okuyama, M. Tanaka, T. Ohashi, T. Morikawa
"Temperature dependence of the yield stress in α-Titanium investigated with crystal plasticity analysis"
Mater. Sci. Forum, Vol.941 (2018), 1474-1478.
[10]B.R. Anne, M. Tanaka, T. Morikawa
"Temperature dependence of mechanical properties in dual phase Ti-6Al-4V"
Mater. Sci. Forum, Vol.941 (2018), 1479-1483.
[11]Ivan Gutierrez-Urrutia, Cheng-Lin Li, Xin Ji, Satoshi Emura, Koichi Tsuchiya
"Quantitative analysis of {332}〈113〉 twinning in a Ti-15Mo alloy by in situ scanning electron microscopy"
Science and Technology of Advanced Materials, Vol.19 [1] (2018), 474-483.
[12]Jian Qiang, Koichi Tsuchiya, Haoyan Diao, Peter K. Liaw
"Vanishing of room-temperature slip avalanches in a face-centered-cubic high-entropy alloy by ultrafine grain formation"
Scripta Materialia, Vol.155 (2018), 99-103.
[13]Baozhen Jiang, Satoshi Emura, Koichi Tsuchiya
"Microstructural evolution and its effect on the mechanical behavior of Ti-5Al-5Mo -5V-3Cr alloy during aging"
Materials Science and Engineering A, Vol.731 (2018), 239-248.
[14]Baozhen Jiang, Satoshi Emura, Koichi Tsuchiya
"Improvement of ductility in Ti-5Al-5Mo-5V-3Cr alloy by network-like precipitation of blocky α phase"
Materials Science and Engineering A, Vol.722 (2018), 129-135.
[15]Baozhen Jiang, Satoshi Emura, Koichi Tsuchiya
"Formation of equiaxed α phase in Ti-5Al-5Mo-5V-3Cr alloy deformed by high-pressure torsion"
Journal of Alloys and Compounds, Vol.738 (2018), 283-291.
[16] *Xiaohua Min, Kai Yao, Xueyin Zhou, Satoshi Emura, Koichi Tsuchiya
"Continuous microstructure evolution of ball rolled TWIP Ti 15Mo alloy and its effect on phase precipitation behavior"
Materials Characterization, Vol.145 (2018), 116-125.
[17] *H. Inui, N. L. Okamoto, S. Yamaguchi
"Crystal Structures and Mechanical Properties of Fe-Zn Intermetallic Compounds Formed in the Coating Layer of Galvannealed Steel"
ISIJ International, Vol.58 (2018), 1550-1561.
A01イ
[1]Ilya Vladimirovich Okulov, Sviatlana V. Lamaka, Takeshi Wada, Kunio Yubuta, Mikhail L. Zheludkevich, Jorg Weissmuller, Jurgen Markmann, Hidemi Kato
"Nanoporous magnesium"
Nano research, Vol.11(12) (2018), 6428-6435.
[2]Oriane Baulin, Damien Fabregue, Hidemi Kato, Takeshi Wada, Sandra Balvay, Daniel J. Hartmann, Jean-Marc Pelletier
"A Ni-, Al-, Be-free Zr-based metallic glass for biomedical applications"
Journal of Non-Crystalline Solids, Vol.500 (2018), 78-83.
[3]J. Jiang, D.X. Wei, T. Wada, D.V. Louzguine-Luzgin, H. Kato
"The mechanical cycling behavior of TiNi based crystal/glassy alloy in the superelastic mode"
Journal of Alloys and Compounds, Vol.768 (2018), 176-180.
[4]Guo, W., Kato, H., Lu, S., Wu, S.
"Porous NiTi particle dispersed Mg-Zn-Ca bulk metallic glass matrix composites"
Materials, Vol.11 (10) (2018), 1959.
[5]Zhao, C., Wada, T., De Andrade, V., Gursoy, D., Kato, H., Chen-Wiegart, Y.-C.K.
"Imaging of 3D morphological evolution of nanoporous silicon anode in lithium ion battery by X-ray nano-tomography"
Nano Energy, Vol.52 (2018), 381-390.
[6]Morgane Mokhtari, Christophe Le Bourlot, Jerome Adrien, Anne Bonnin, Takeshi Wada, Jannick Duchet-Rumeau, Hidemi Kato, Eric Maire
"Microstructure characterization by X-ray tomography and EBSD of porous FeCr produced by liquid metal dealloying"
Materials Characterization, Vol.144 (2018), 166-172.
[7]I.V. Okulov, A.V. Okulov, I.V. Soldatov, B. Luthringer, R. Willumeit-Romer, T. Wada, H. Kato, J. Weissmuller, J. Markmann
"Open porous dealloying-based biomaterials as a novel biomaterial platform"
Materials Science and Engineering:, Vol.88 (2018), 95-103.
[8]G. Kawamura, K. Ohara, W.K. Tan, H. Muto, K. Yamaguchi, A.R. Boccaccini, A. Matsuda
"Sol-gel template synthesis of BaTiO3 films with nano-periodic structures"
Materials Letters, Vol.227 (2018), 120-123.
[9]R. Matsuda, E. Hirahara, N. H. H. Phuc, H. Muto, H. Tsukasaki, S. Mori, A. Matsuda
"Preparation of LiNi1/3 Mn1/3 Co1/3 O2/Li3PS4 cathode composite particles using a new liquid-phase process and application to all-solid-state lithium batteries"
Ceramics Society of Japan, Vol.126 (10) (2018), 826-831.
[10]朱 修賢, 和田 武, 加藤 秀実, Hong Soon-Jik, Kim Hyoung Seop
"メカニカルアロイングによるCoCrFeMnNi ハイエントロピー合金粉末の作製とその放電プラズマ焼結"
まてりあ (Materia Japan), Vol.57 (7) (2018), 333.
A02ウ
[1]Y. Aoyagi, A. Sagara, C. Watanabe, M. Kobayashi, Y. Todaka and H. Miura
"Crystal Plasticity Simulation Considering Microstructures of Austenitic Stainless Steel on Macroscopic Yield Function"
Materials Science Forum, Vol.941 (2018), 212-217.
[2]Y. Wang, J. Du, S. Shinzato, L. Dai, S. Ogata
"A free energy landscape perspective on the nature of collective diffusion in amorphous solids"
Acta Materialia, Vol.157 (2018), 165-173.
A02エ
[1]Y. Ishiguro, Y. Tsukada, T. Koyama
"Phase-field simulation of spinodal decomposition and its effect on stress-induced martensitic transformation in Ti-Nb-O alloys"
Computational Materials Science, Vol.151 (2018), 222-230.
[2]S. Iikubo, K. Shimoyama, S. Kawano, M. Fujii, K. Yamamoto, M. Matsushita, T. Shinmei, Y. Higo, H. Ohtani
"Novel stable structure of Li3PS4 predicted by evolutionary algorithm under high-pressure"
AIP Advances, Vol.8 (2018), 015008.
[3]K. Hirata, S.Iikubo, M. Koyama, K. Tsuzaki, and H. Ohtani
"First-Principles Study on Hydrogen Diffusivity in BCC, FCC, and HCP Iron"
Metall Mater Trans A, Vol.49 (2018), 5015-5022.
[4]Taichi Abe, Ying Chen, Arkapol Saengdeejing and Yoshinao Kobayashi
"Computational phase diagrams for the Nd-based magnets based on the combined ab initio/ CALPHAD approach"
Scripta Materialia, Vol.154 (2018), 305-310.
[5]Chang Liu, Mitsuhiro Asato, Nobuhisa Fujima, Toshiharu Hoshino, Ying Chen and Tetsuo Mohri
"Real Space Cluster Expansion for Total Energies of Pd-Rich PdX (X=Rh, Ru) Alloy, Based on Full-Potential KKR Calculations: An Approach from a Dilute Limit"
Materials Transactions, Vol.59 (2018), 1669-1676.
[6]K. Han*, I. Ohnuma, K. Okuda, R.Kainuma
"Experimental determination of phase diagram in the Zn-Fe binary system."
J. Alloys Compd., Vol.737 (2018), 490-504.
[7]T. Hagisawa, T. Omori, I. Ohnuma, R. Kainuma, K. Ishida
"Effects of liquid indium particles on recrystallization and grain growth of αFe in Fe-In alloys."
Materials Transactions, Vol.59 (2018), 188-197.
[8]T.Abe, M.Shimono, K.Hashimoto, C.Kocer
"Gibbs energy functions with the vacancy complexes in the Al-Cu binary system"
Data in Brief, Vol.21 (2018), 432-440.
[9]T.Abe, M.Shimono, K.Hashimoto, C.Kocer
"A description of vacancy complexes in an FCC solid solution within the framework of the CALPHAD Method"
Calphad, Vol.63 (2018), 100-106.
A03オ
[1]Y.Z. Tian, T. Xiong, S.J. Zheng, Y. Bai, J. Freudenberger, R. Pippan, Z.F. Zhang∗, N. Tsuji
"Ultrafine-grained CuAg7Zr0.05 alloy with fully recrystallized microstructure"
Materialia, Vol.3 (2018), pp.162-168.
[2]*Rajeshwar R Eleti, Tilak Bhattacharjee, Lijia Zhao, Pinaki P Bhattacharjee, Nobuhiro Tsuji
"Hot deformation behavior of CoCrFeMnNi FCC high entropy alloy"
Materials Chemistry and Physics, Vol.210 (2018), 176-186.
[3]M. Reihanian, E. Bagherpour*, N. Pardis, R. Ebrahimi, N. Tsuji
"Ten Years of Severe Plastic Deformation (SPD) in Iran, Part II: Accumulative Roll Bonding (ARB)"
Iranian J. Mater. Form., Vol.5 (2018), pp.1-25.
[4]S.Kikuchi, H.Akebono, A.Ueno, K.Ameyama
"Formation of Commercially Pure Titanium with a Bimodal Nitrogen Diffusion Phase Using Plasma Nitriding and Spark Plasma Sintering"
Powder Technology, Vol.330 (2018), 349-356.
[5]Z.ZHANG, S.Shi, X.Wang, G.Zhou, G.Xie, D.Wang, X.Chen, K.Ameyama
"Microstructure Evolution and Enhanced Mechanical Properties in SUS316LN Steel Processed by High Pressure Torsion at Room Temperature"
Materials Science & Engineering A, Vol.711 (2018), 476-483.
[6]J.Li, J.Liu, G.Dirras, K.Ameyama, F.Cazes, M.Ota
"A three-dimensional multi-scale polycrystalline plasticity model coupled with damage for pure Ti with harmonic structure design"
International Journal of Plasticity, Vol.100 (2018), 192-207.
[7]D.Ueda, G.Dirras, A.Hocini, D.Tingaud, K.Ameyama, P.Langlois, D.Vrel, Z.Trzaska
"Data on processing of Ti-25Nb-25Zr β-titanium alloys via powder metallurgy route: Methodology, microstructure and mechanical properties"
Data in Brief, Vol.17 (2018), 703-708.
[8]S.Kikuchi, Y.Nukui, H.Kubozono, Y.Nakai, A.Ueno, M.O.Kawabata, K.Ameyama
"Fractographic analysis of fatigue crack initiation and propagation in CP titanium with a bimodal harmonic structure"
Materials Science & Engineering A, Vol.716 (2018), 228-234.
[9]H.K.Park, K.Ameyama, J.Yoo, H.Hwang, H.S.Kim
"Additional hardening in harmonic structured materials by strain partitioning and back stress"
Materials Research Letters, Vol.6 (2018), 261-267.
[10]S.K.Vajpai, B.Sharma, M.Ota, K.Ameyama
"Effect of Cold Rolling and Heat-treatment on the Microstructure and Mechanical Properties of β-Titanium Ti-25Nb-25Zr Alloy"
Materials Science and Engineering A, Vol.736 (2018), 323-328.
[11]G.Li, S.Morinaka, M.Kawabata, C.Ma, K.Ameyama
"Improvement of Strength with Maintaining Ductility of Harmonic Structure Pure Copper by Cold Rolling and Annealing Process"
Procedia Manufacturing, Vol.15 (2018), 1641-1648.
[12]T. Fujieda, Y. Cui, K. Aoyagi, Y. Koizumi, A. Chiba
"Electron beam melting of boron-modified Ti-2Al-2Sn-4Zr-2Mo-0.1Si alloy with superior tensile strength and oxidation resistance at elevated temperatures"
Materialia, Vol.4 (2018), 367-372.
[13]T.-I. Hsu, C.-M. Wei, L.-D. Wu, Y.-P. Li, A. Chiba, M.-H. Tsai
"Nitinol powders generate from Plasma Rotation Electrode Process provide clean powder for biomedical devices used with suitable size, spheroid surface and pure composition"
Scientific Reports, Vol.8 (2018), 13776.
[14]D. Wei, Y. Koizumi, A. Chiba, K. Ueki, K. Ueda, T. Narushima, Y. Tsutsumi, T. Hanawa
"Heterogeneous microstructures and corrosion resistance of biomedical Co-Cr-Mo alloy fabricated by electron beam melting (EBM)"
Additive Manufacturing, Vol.24 (2018), 103-114.
[15]S.-H. Sun, Y. Koizumi, T. Saito, K. Yamanaka, Y.-P. Li, Y. Cui, A. Chiba
"Electron beam additive manufacturing of Inconel 718 alloy rods: Impact of build direction on microstructure and high-temperature tensile properties"
Additive Manufacturing, Vol.23 (2018), 457-470.
[16]K. Kuwabara, H. Shiratori, T. Fujieda, K. Yamanaka, Y. Koizumi, A. Chiba
"Mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy fabricated with selective electron beam melting"
Additive Manufacturing, Vol.23 (2018), 264-271.
[17]D. Wei, Y. Koizumi, T. Takashima, M. Nagasako, A. Chiba
"Fatigue improvement of electron beam melting-fabricated biomedical Co–Cr–Mo alloy by accessible heat treatment"
Materials Research Letters, Vol.6 (2018), 93-99.
[18]K Oikawa, YH Su, R Kiyanagi, T Kawasaki, T Shinohara, T Kai, K Hiroi, S. Harjo, J.D. Parker, Y. Matsumoto, H. Hayashida, S.Y. Zhang, Y. Tomota, H. Sato
"Recent progress on practical materials study by Bragg edge imaging at J-PARC"
Physica B:Condensed Matter, Vol.551 (2018), pp.436-442.
[19]B Wang, H He, M Naeem, S Lan, S Harjo, T Kawasaki, Y Nie, HW Kui, T Ungár, D Ma, AD Stoica, Q Li, Y Ke, CT Liu, X-L Wang
"Deformation of CoCrFeNi high entropy alloy at large strain"
Scripta Materialia, Vol.155 (2018), 54-57.
[20]T. Kawasaki, Y. Inamura, T. Ito, T. Nakatani, S. Harjo, W. Gong, K. Aizawa
"Stroboscopic time-of-flight neutron diffraction during cyclic testing using the event data recording system at J-PARC"
Journal of Applied Crystallography, Vol.51 (2018), pp.630-634.
[21]P. Xu, S. Harjo, M. Ojima, H. Suzuki, T. Ito, W. Gong, S.C. Vogel, J. Inoue, Y. Tomota, K. Aizawa and K. Akita
"High stereographic resolution texture and residual stress evaluation using time‐of‐flight neutron diffraction"
Journal of applied crystallography, Vol.51 (2018), pp.746-760.
[22]佐藤成男，黒田あす美，佐藤こずえ，熊谷正芳，ステファヌス ハルヨ, 友田陽，齋藤洋一，轟秀和，小貫祐介, 鈴木茂
"中性子回折ラインプロファイル解析によるフェライト系およびオーステナイト系ステンレス鋼の引張変形中の転位増殖その場観察"
鉄と鋼, Vol.104 (2018), pp.201-207.
[23]T. Bhattacharjee*, I. S. Wani, S. Sheikh, I. T. Clark, T. Okawa, S. Guo, P. P. Bhattacharjee, N. Tsuji
"Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing"
Scientific Reports, Vol.8 (2018), article no.3276.
[24]Tilak Bhattacharjee*, Ruixiao Zheng, Yan Chong, Saad Sheikh, Sheng Guo, Ian Thomas Clark, Toshiro Okawa, Irfan Samad Wani, Pinaki Prasad Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji
"Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy"
Materials Chemistry and Physics, Vol.210 (2018), pp.207-212.
A03カ
[1]Yongjie Zhang, Goro Miyamoto, Tadashi Furuhara
"Atom Probe Compositional Analysis of Interphase Precipitated Nano-sized Alloy Carbide in Multiple Microalloyed Low-Carbon Steels"
Microscopy and Microanalysis, Vol.25 (2018), 447-453.
[2]M. Okube, T. Oshiumi, T. Nagase, R. Miyawaki, A. Yoshiasa, S. Sasaki and K. Sugiyama
"Site occupancy of Fe2+, Fe3+ and Ti4+ in titanomagnetite determined by valence-difference contrast in synchrotron X-ray resonant scattering"
Journal of Synchrotron Radiation, Vol.25 (2018), 1694-1702.
[3]B. Han, J. Wei, Y. Tong, D. Chen, Y. Zhao, J. Wang, F. He, T. Yang, C. Zhao, Y. Shimizu, K. Inoue, Y. Nagai, A. Hu, C. T. Liu, J. J. Kai
"Composition evolution of gamma prime nanoparticles in the Ti-doped CoFeCrNi high entropy alloy"
Scripta Materialia, Vol.148 (2018), 42–46.
[4]杉田一樹, 水野正隆, 荒木秀樹, 白井泰治
"陽電子寿命測定と第一原理計算から視えてきたハイエントロピー合金CoCrFeMnNi中の空孔形成と移動のエンタルピー"
まてりあ, Vol.57 (2018), 323-327.