2022年

A01ア

[1]* K. Kishida, Z. Chen, H. Matsunoshita, T. Maruyama, T. Fukuyama, Y. Sasai, H. Inui
"Plastic deformation of bulk and micropillar single crystals of Mo₅Si₃ with the tetragonal D8m structure"
International Journal of Plasticity, Vol.155 (2022), 103339.

[2]* Z. Chen, K. Kishida, H. Inui, M. Heilmaier, U. Glatzel, G. Eggeler
"Improving the intermediate- and high-temperature strength of L1₂ -Co₃(Al,W) by Ni and Ta additions"
Acta Materialia, Vol. 238 (2022), 118224

[3]* L. Li, Z. Chen, S. Kuroiwa, M. Ito, K. Yuge, K. Kishida, H. Tanimoto, Y. Yu, H. Inui, E.P. George
"Evolution of short-range order and its effects on the plastic deformation behavior of single crystals of the equiatomic Cr-Co-Ni medium-entropy alloy"
Acta Materialia, Vol. 243 (2023), 118537.

[4]* K. Kishida, H. Suzuki, M. Okutani, H. Inui
"Room-temperature plastic deformation of single crystals of α-manganese - hard and brittle metallic element "
International Journal of Plasticity, Vol.160 (2023), 103510.

[5]* Z. Fan, L. Li, Z. Chen, M. Asakura. C. Zhang, Z. Yang, H. Inui, E.P. George
"Temperature-dependent yield stress of single crystals of non-equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloys in the temperature range 10-1173 K"
Acta Materialia, Vol. 246 (2023), 118712.

[6] T. Tsuru, S. Han, S. Matsuura, Z. Chen, K. Kishida, I. Iobzenko, S. I. Rao, C. Woodward, E. P. George, H. Inui
"Intrinsic factors responsible for brittle versus ductile nature of refractory high-entropy alloys"
Nature Communications, 15(2024), 1706.

[7] ​​J. Shimamura, T. Morikawa, S. Yamasaki, M. Tanaka
"Sulfide Stress Cracking (SSC) of Low Alloy Linepipe Steels in Low H₂S Content Sour Environment"
ISIJ International, 62 (2022), 2095-2106.

[8] ​​T. Morikawa, R. Kurosaka, M. Tanaka, T. Ichie, K.-i. Murakami
"Strain Distribution Analysis Using Precise Markers in Cold-Rolled Ultra-Low Carbon Steel"
 ISIJ International, 62 (2022), 2069-2073.

[9] Y. Aoki, M. Koyama, M. Tanaka, K. Tsuzaki
"Crack Tip Deformation during Dwell Fatigue and Its Correlation with Crack/Fracture Surface Morphologies in a Bi-Modal Ti–6Al–4V Alloy"
Mater. Trans., 63 (2022), 1232-1241.

[10] Y. Okuyama, M. Tanaka, T. Morikawa
"Temperature Independences of Fatigue Crack Growth in Ti–0.49 mass%O"
Mater. Trans., 63 (2022), 600-606.

[11] K. Takata, J. Fujise, B. Ko, T. Ono, M. Tanaka
"Effect of ion implantation on mechanical strength of silicon wafers"
Japanese Journal of Applied Physics, 61 (2022), 045503.

[12]* Z. Gao, Y. Zhao, J. Park, A. Jeon, K. Murakami, S. Komazaki, K. Tsuchiya, U. Ramamurty, J. Jang
"Decoupling the roles of constituent phases in the strengthening of hydrogenated nanocrystalline dual-phase high-entropy alloys"
Scripta Materialia, 210(2022)114472.

[13]* D. Lee, Z. Gao, J. Park, Y. Zhao, J. Suh, E.A. Jagle, K. Tsuchiya, U. Ramamurty, J. Jang
"Nanomechanical and microstructural characterization on the synergetic strengthening in selectively laser melted austenitic stainless steel"
Scripta Materialia, 209(2022)114539

[14] B. Jiang, D. Ma, S. Emura, K. Tsuchiya
"Microstructural response and mechanical properties of α-precipitated Ti–5Al–5Mo–5V–3Cr alloy processed by high-pressure torsion"
Journal of Materials Research and Technology, 23(2023)564-576.

[15] H. Somekawa, J. Yi, H. Takahashi, T. Hiroto, K. Tsuchiya
"Cavitation behavior during tensile deformation at room temperature in fine-grained pure magnesium"
Materials Science and Engineering, A857(2022)143831.

[16] H. Takasu, K. Kimura, E. Yukutake, T. Ito, M. Noda, H. Somekawa, K. Tsuchiya, S. Kuramoto
"Mechanical properties of fine-grained flame resistant magnesium alloys processed with severe plastic deformation”
J. Light Metal Welding, 60(2022)236-243. (in Japanese)

[17] K. Fukuta, K. Tsuchiya, H. Miyazaki
"Improving thermoelectric performance of Fe₂VAl-Based Heusler Compounds via high-pressure torsion"
Y. Nishino: Applied Physics A (2022)128:184

[18] T. Mineta, R. Suzumura, A. Konya, H. Sato
"Effect of strain-induced grain boundary migration on microstructure and creep behavior of extruded AZ31 magnesium alloy prepared by pre-compression and annealing treatment”
Materials Today Communications, Vol. 34 (2023), 105502.

[19]* T. Mineta, H. Saijo, H. Sato
"High temperature creep deformation behavior of heat-treated (α+β)-Mg-9Li-4Al-1Zn alloy”
Journal of Alloys and Compounds, Vol. 910 (2022) 1649380.

A01イ

[1]* Y. Ohashi, T. Wada, H. Kato
"High-entropy design and its influence on glass-forming ability in Zr-Cu-based metallic glass"
Journal of Alloys and Compounds, 915, (2022), 165366

[2]* A. Takeuchi, T. Wada, K. Amiya, H. Kato, T. Nagase
"Fe₂₀Mo₂₀Ni₂₀Rh₂₀Ru₂₀ and Fe₁₄Mo₃₅Ni₁₅Rh₁₅Ru₂₁ Ultrahigh-Mixing-Entropy Alloys with Single Hexagonal Close-Packed Structure"
Materials Transactions, (2023) Advanced view

[3]* M. Kato, M. Nishimoto, I. Muto, Y. Sugawara
"Role of Cu in corrosion resistance of CoCrCuFeNi medium-entropy alloys: Importance of compositional change and thickening of oxide films"
Corrosion Science, Vol. 213 (2023), 110982.

[4]* W.K. Tan, Y. Matsubara, A. Yokoi, G. Kawamura, A. Matsuda, I. Sugiyama, N. Shibata, Y. Ikuhara, H. Muto
"Transparent conductive polymer composites obtained via electrostatically assembled carbon nanotubes–poly (methyl methacrylate) composite particles"
Advanced Powder Technology, Vol. 33 (2022), 103528.

[5]* H. Muto, Y. Sato, W.K. Tan, A. Yokoi, G. Kawamura, A. Matsuda
"Controlled formation of carbon nanotubes incorporated ceramic composite granules by electrostatic integrated nano-assembly"
Nanoscale, Vol. 14 (2022), 9669-9674.

[6]* H. Muto, T. Amano, W.K. Tan, A. Yokoi, G. Kawamura, A. Matsuda
"Ordered arrays of electrostatically assembled SiO₂–SiO₂ composite particles by electrophoresis-induced stimulation"
Journal of Sol-Gel Science and Technology, Vol. 104 (2022), 548–557.

[7]* T. Nakazono, A. Yokoi, W.K. Tan, G. Kawamura, A. Matsuda, H. Muto
"A Novel Controlled Fabrication of Hexagonal Boron Nitride Incorporated Composite Granules Using the Electrostatic Integrated Granulation Method"
Nanomaterials, Vol. 13 (2023), 199.

[8]* M.Z. Toe, W.K. Tan, H. Muto, G. Kawamura, A. Matsuda, S. Y. Pung
"Evaluation of the Structural, Optical and Photoconversion Efficiency of ZnO Thin Films Prepared Using Aerosol Deposition"
Applied Sciences, Vol. 13 (2023), 1905.

[9] Daixiu Wei, Wu Gong, Tomohito Tsuru, Ivan Lobzenko, Xiaoqing Li, Stefanus Harjo, Takuro Kawasaki, Hyeon-Seok Do, Jae Wung Bae, Christian Wagner, Guillaume Laplanche, Yuichiro Koizumi, Hiroki Adachi, Kenta Aoyagi, Akihiko Chiba, Byeong-Joo Lee, Hyoung Seop Kim, Hidemi Kato
"Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys"
International Journal of Plasticity, Vol.159, (2022), 103443

[10] Daixiu Wei, Wu Gong, Liqiang Wang, Bowen Tang, Takuro Kawasaki, Stefanus Harjo, Hidemi Kato
"Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects"
Journal of Materials Science & Technology, Vol.129, (2022), 251-260

[11] Ting Zhang; Daixiu Wei, Eryi Lu; Wen Wang; Kuaishe Wang; Xiaoqing Li; Lai-Chang Zhang; Hidemi Kato; Weijie Lu; Liqiang Wang
"Microstructure evolution and deformation mechanism of α+β dual-phase Ti-xNb-yTa-2Zr alloys with high performance"
Journal of Materials Science & Technology, Vol.131, (2022), 68-81

[12] Daixiu Wei, Wu Gong, Tomohito Tsuru, Takuro Kawasaki, Stefanus Harjo, Biao Cai, Peter K.Liaw, Hidemi Kato
"Mechanical behaviors of equiatomic and near-equiatomic face-centered-cubic phase high-entropy alloys probed using in situ neutron diffraction"
International Journal of Plasticity, 158, (2022), 103417

[13] Shinya Hosokawa, Jean-Francois Berar, Nathalie Boudet, Wolf-Christian Pilgrim, Laszlo Pusztai, Satoshi Hiroi, Shinji Kohara, Hidemi Kato, Henry E. Fischer, Anita Zeidler
"Relationship between atomic structure and excellent glass forming ability in Pd_42.5Ni_7.5Cu₃₀P₂₀ metallic glass"
Journal of Non-Crystalline Solids, 596, (2022), 121868

[14] Duan Y.J.; Zhang L.T.; Qiao J.C.; Wang, Yun-Jiang; Yang Y.; Wada T.; Kato H.; Pelletier J.M.; Pineda E.; Crespo D.
"Intrinsic Correlation between the Fraction of Liquidlike Zones and the Relaxation in High-Entropy Metallic Glasses"
Physical Review Letters, 129(17), (2022), 175501

[15] Hyeonseok Kwon, Stefanus Harjo, Takuro Kawasaki, Wu Gong, Sang Guk Jeong, Eun Seong Kim, Praveen Sathiyamoorthi, Hidemi Kato & Hyoung Seop Kim
"Work hardening behavior of hot-rolled metastable Fe₅₀Co₂₅Ni₁₀Al₅Ti₅Mo₅ medium-entropy alloy: in situ neutron diffraction analysis"
Science and Technology of Advanced Materials, 23(１), (2022), 579-586

[16] Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen & Hidemi Kato
"Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production"
Nature Communications, 13(1), (2022), 5157

[17] Junpeng Ren, Yanhui Li, Xiaoyu Liang, Hidemi Kato, Wei Zhang
"Role of Fe substitution for Co on thermal stability and glass-forming ability of soft magnetic Co-based Co-Fe-B-P-C metallic glasses"
Intermetallics, 1476, (2022), 107598

[18] Daixiu Wei, Wu Gong, Takuro Kawasaki, Stefanus Harjo, Hidemi Kato
"Regulation of strength and ductility of single-phase twinning-induced plasticity high-entropy alloys"
Scripta Materialia, 216, (2022), 114738

[19] Joo S.-H., Kato H.
"3D interconnected nanoporous FeCo soft magnetic materials synthesized by liquid metal dealloying"
Journal of Alloys and Compounds, 908, (2022), 164688

[20] Langting Zhang, Yajuan Duan, Eloi Pineda, Hidemi Kato, Jean-Marc Pelletier, Jichao Qiao
"Effect of physical aging and cyclic loading on power-law creep of high-entropy metallic glass"
Journal of Materials Science & Technology, 1154, (2022), 1-9

[21] L. T. Zhang, Y. J. Wang, E. Pineda, H. Kato, Y. Yang, J. C. Qiao
"Sluggish dynamics of homogeneous flow in high-entropy metallic glasses"
Scripta Materialia, 214, (2022), 114673

[22] Akira Takeuchi, Takeshi Wada, Takeshi Nagase and Kenji Amiya
"Ultra-High Mixing Entropy Alloys with Single bcc, hcp, or fcc Structure in Co-CrV-Fe-X (X = Al, Ru, or Ni) Systems Designed with Structure-Dependent Mixing Entropy and Mixing Enthalpy of Constituent Binary Equiatomic Alloys"
Materials Transactions, 63(6), (2022), 835-844

[23] V. Zadorozhnyy, I. Tomilin, E. Berdonosova, C. Gammer, M. Zadorozhnyy, I. Savvotin, I. Shchetinin, M. Zheleznyi, A. Novikov, A. Bazlov, M. Serov, G. Milovzorov, A. Korol, H. Kato, J. Eckert, S. Kaloshkin, S. Klyamkin
"Composition design, synthesis and hydrogen storage ability of multi-principal-component alloy TiVZrNbTa"
Journal of Alloys and Compounds, 901, (2022), 1636388

[24] S. H. Joo, Y. B. Jeong, T. Wada, I. V. Okulov, H. Kato
"Inhomogeneous dealloying kinetics along grain boundaries during liquid metal dealloying"
Journal of Materials Science and Technology, 106, (2022), 41-48

[25] Y. J. Duan, L. T. Zhang, T. Wada, H. Kato, E. Pineda, D. Crespo, J. M. Pelletier, J. C. Qiao
"Analysis of the anelastic deformation of high-entropy Pd₂₀Pt₂₀Cu₂₀Ni₂₀P₂₀ metallic glass under stress relaxation and recovery"
Journal of Materials Science and Technology, 107, (2022), 82-91

[26] H. Saito, I. Muto, M. Nishimoto, Y. Sugawara
"Corrosion-resistant sintered stainless steels with non-equilibrium Mo-rich phases"
Materials Today Communications, Vol. 33 (2022), 104211.

[27] T. Akatsu, Y. Takiguchi, Y. Shinoda, F. Wakai, H. Muto
"Optical transmittance and electrical conductivity of silica glass with biserial and hierarchical network structures made of carbon nanofibers"
Ceramics International, Vol. 48 (2022), 36515-36520.

A01公募

[1]* P. Bi, N. Hashimoto, S. Hayashi, H. Oka, S. Isobe
"Effect of Al on oxidation behavior of Al_xCrCuFeNi₂ (x=0.2, 0.4, 0.6) high entropy alloys"
Corrosion Science 208 (2022) 110697.

[2]* Y. Zong, R. Ikubo, N. Hashimoto, H. Oka
"Irradiation behavior of HfNbTaTiV in comparison of HfNbTaTiZr and F82H"
Journal of Nuclear Science and Energy (2022) 2162141.

[3]* N. Hashimoto, E. Wada, H. Oka
"Effect of stacking fault energy on irradiation damage in reduced activation high entropy alloys"
J. Nucl. Mater. (2022) 153767.

[4]* Y. Zong, N. Hashimoto, H. Oka
"Study on irradiation effects of reflectory bcc high-entropy alloy"
Nucl. Mater. Ener. 31 (2022) 101158.

[5]* M. Zhu, M. T. Nguyen, T. Yonezawa
“Co-sputtered CuPt/Ag alloy nanoparticles and comparative catalytic performance of mono-, bi-, and tri-metallic nanoparticles in oxygen reduction reaction”
Mater. Adv., Vol. 3(24) (2022) 8967-8976.

[6]* Huang, M. T. Nguyen, W. J. Sim, M. Takahashi, S. Kheawhom, T. Yonezawa
“Co_xNi_1-xO-NiCo₂O₄/rGO Synergistic Bifunctional Electrocatalysts for High-Rate Rechargeable Zinc-Air Battery”
Sus. Energy Fules, Vol. 6(17) (2022) 3931-3943.

[7]* W. J. Sim, M. T. Nguyen, Z. Huang, S. Kheawhom, C. Wattanakit, T. Yonezawa
“Efficient iron-cobalt oxide bifunctional electrode catalyst in rechargeable high current density zinc-air battery”
Nanoscale, Vol. 14(22) (2022) 8012-8022.

[8] Y.-t. R. Chau, M. T. Nguyen, T. Yonezawa
“Mechanistic consideration of ZnTe microspheres formation in a PVP-contained polyol system via hot injection method”
Adv. Powder Technol., Vol. 34(4) (2023) 103970.

[9] M. Gopalakrishnan, M. Etesami, J. Theerthagiri, M. Y. Choi, S. Wannapaiboon, M. T. Nguyen, T. Yonezawa, S. Kheawhom
“Tailoring MOF structure via ligand optimization achieved dandelion flower like CoS/Co-Nx/CoNi/NiS catalyst to enhance ORR/OER for zinc-air batteries”
Nanoscale, Vol. 14(48) (2022) 17908-17920.

[10] S. R. Motlagh, R. Khezri, A. A. Mohamad, R. Pornprasertsuk, P. Kidkhunthod, M. T. Nguyen, T. Yonezawa, S. Kheawhom
“Enhancing electrochemical performance and stabilizing zinc anode in mild acidic electrolyte using combined additive”
Mater. Sci. Energy Technol., Vol. 6 (2023) 178-191.

[11] 浅野ちひろ，高橋唯仁，春藤晃人，伊藤新次，米澤 徹
「薄膜旋回型攪拌技術を利用したTiO2分散による紫外線遮蔽効果の顕著な改善」
日本化粧品技術者会誌，56(3), 281-289 (2022).

[12] H. Liu, N. Miyamoto, M. T. Nguyen, H. Shirato, T. Yonezawa
“Injectable fiducial marker for image-guided radiation therapy based on gold nanoparticles and a body temperature-activated gel-forming system”
ACS Appl. Bio Mater., Vol. 5(10) (2022) 4838-4848 (2022).

[13] I. Akita, Y. Ishida, T. Yonezawa
“Mixed Metal-Atom Markers Enable Simultaneous Imaging of Spatial Distribution in Two-Dimensional Heterogeneous Molecular Assembly by Scanning Transmission Electron Microscopy”
 ACS Meas. Sci. Au, Vol. 2(6) (2022) 542-546.

[14] D. Govindarajan, N. Palaniyandy, K. K. Chinnakutti, M. T. Nguyen, T. Yonezawa, J. Qin, S. Kheawhom
“Sputter Deposited Binder-Free Nanopyramidal Cr/γ-Mo2N TFEs for High Performance Supercapacitors”
Nanoscale Res. Lett., Vol. 17 (2022) 65

[15] M. Etesami, R. Khezri, A. Abbasi, M. T. Nguyen, T. Yonezawa, S. Kheawhom, A. Somwangthanaroj
“Ball mill-assisted synthesis of NiFeCo-NC as bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries”
J. Alloys Compds., Vol. 922 (2022) 166287.

[16] H. Kawasaki, T. Otsuki, F. Sugino, K. Yamamoto, T. Tokunaga, R. Tokura, T. Yonezawa
“Liquid metal catalyst for the conversion of ethanol into graphitic carbon layers under ultrasonic cavitation field”
Chem. Commun. Vol. 58(56) (2022) 7741-7744.

[17] M. Etesami, M. T. Nguyen, T. Yonezawa, A. Tuantranont, A. Somwangthanaroj, S. Kheawhom
“3D Carbon nanotubes-graphene hybrids for energy devices”
Chem. Eng. J., Vol. 446(3) (2022) 137190.

[18] H.-h. Huang, S. Juodkazis, E. G. Gamaly, T. Nagashima, T. Yonezawa, K. Hatanaka
“Spatio-temporal control of THz emission”
Commun. Phys., Vol. 5 (2022) 134.

[19] H. Liu, N. Miyamoto, M. T. Nguyen, H. Shirato, T. Yonezawa
“Green and effective synthesis of gold nanoparticles as injectable fiducial marker for real-time image gated proton therapy”
Mater. Adv., Vol. 3(13) (2022) 5430-5441.

[20] R. Tokura, H. Tsukamoto, T. Tokunaga, M. T. Nguyen, T. Yonezawa
“The role of surface oxides and stabilising carboxylic acids of copper nanoparticles during low-temperature sintering”
Mater. Adv., Vol. 3(12) (2022) 4802-4812.

[21]* Aimi A. H. Tajuddin, Mitsuru Wakisaka, Tatsuhiko Ohto, Yue Yu, Haruki Fukushima, Hisanori Tanimoto, Xiaoguang Li, Yoshitatsu Misu, Samuel Jeong, Jun-ichi Fujita, Hirokazu Tada, Takeshi Fujita, Masaki Takeguchi, Kaori Takano, Koji Matsuoka, Yasushi Sato, Yoshikazu Ito
“Corrosion-resistant and high-entropic non-noble-metal electrodes for oxygen evolution in acidic media”
Advanced Materials, (2022) 2207466 (9 pages)

[22]* Le Li, Zhenghao Chen, Shogo Kuroiwa, Mitsuhiro Ito, Koretaka Yuge, Kyosuke Kishida, Hisanori Tanimoto, Yue Yu, Haruyuki Inui, Easo P. George
“Evolution of short-range order and its effects on the plastic deformation behavior of single crystals of the equiatomic Cr-Co-Ni medium-entropy alloy”
Acta Materialia 243 (2023) 118537 (14 pages)

[23] Seoungmin Chon, Yuki Sugisawa, Shigeru Kobayashi, Kazunori Nishio, Markus Wilde, Natsuko Kishi, Daiichiro Sekiba, Katsuyuki Fukutani, Taro Hitosugi, Ryota Shimizu. 
“Selective Epitaxial Growth of Ca₂NH and CaNH Thin Films by Reactive Magnetron Sputtering under Hydrogen Partial Pressure Control”
J. Phys. Chem. Lett. 13, 10169 (2022).

[24] Ryo Nakayama, Ryota Shimizu, Taishi Haga, Takefumi Kimura, Yasunobu Ando, Shigeru Kobayashi, Nobuaki Yasuo, Masakazu Sekijima, Taro Hitosugi
“Tuning of Bayesian optimization for materials synthesis: simulation of the one-dimensional case”
STAM Methods 2, 119 (2022).

[25]* A. Takeuchi, T. Wada, K. Amiya, H. Kato, T. Nagase
"Fe₂₀Mo₂₀Ni₂₀Rh₂₀Ru₂₀ and Fe₁₄Mo₃₅Ni₁₅Rh₁₅Ru₂₁ Ultra-High Mixing Entropy Alloys with Single hcp Structure"
Materials Transactions, Vol. 64 (2023) 841-848.

[26]* A. Takeuchi, T. Wada, T. Nagase, K. Amiya
"Ultra-High Mixing Entropy Alloys with Single bcc, hcp, or fcc Structure in Co-Cr-V-Fe-X (X = Al, Ru, or Ni) Systems Designed with Structure-Dependent Mixing Entropy and Mixing Enthalpy of Constituent Binary Equiatomic Alloys"
Materials Transactions, Vol.63 (2022) 835-844.

[27] 永瀬丈嗣, 寺井智之, 松室光昭, 武村守
"Fe-P-C-Ag液体分離金属ガラスの合金設計と凝固組織"
粉体および粉末冶金, Vol.69 (2022) 185-194.

[28] K. Mine, M. Yamaguchi, H. Murakawa, N. Hanasaki, and M. Matsuda
"A large negative magnetoresistance effect in semiconducting crystals composed of an octahedrally ligated phthalocyanine complex with high-spin manganese(III)"
RSC Advances, Vol. 12 (2022), 17944.

[29] R. Teruya, T. Sato, M. Yamashita, N. Hanasaki, A. Ueda, and M. Matsuda
"Reversible Insulator-Metal Transition by Chemical Doping and Dedoping of a Mott Insulator"
Angewandte Chemie-International Edition, Vol. 2022 (2022), e202206428.

[30] H.Yoshizawa, H.Sakai, M.Kondo, M.Ochi, K.Kuroki, N.Hanasaki, and J.Fujioka
"In-plane anisotropic charge dynamics in the layered polar Dirac semimetal BaMnSb₂"
Physical Review B, Vol. 105 (2022), L241110.

[31]* K. Yokoi, H. Murakawa, H. Sakai, and N. Hanasaki
"Anomalous Nernst effect in the nonmagnetic nodal-line semimetal PbTaSe₂"
Physical Review B, Vol. 106 (2022), 115118.

[32]* T. Teramoto, K. Kitasumi, R. Shimohara, Y. Ito, R. Shimizu, K. Tanaka
"Formation condition and effect on the early stages of plastic deformation of chemical short-range order in Cr-Co-Ni medium-entropy alloy"
Journal of Alloys and Compounds, Vol. 941 (2023), 169016.

[33]* N. Tarutani, S. Kimura, T. Sakata, K. Suzuki, K. Katagiri, K. Inumaru
"Metal Hydroxide Salt Monolayer Nanoparticles: Synthesis, Redox Characterization, and Electrochemical Catalytic Performance"
ACS Materials Letters, Vol. 4 (2022), 1430−1435.

[33]* N. Tarutani, R. Uesugi, K. Uemura, K. Katagiri, K. Inumaru, Y. Takeoka
"Understanding the Electrophoretic Deposition Accompanied by Electrochemical Reactions Toward Structurally Colored Bilayer Films"
ACS Applied Materials & Interfaces, Vol. 14 (2022), 23653–23659.

[34] N. Tarutani, K. Kawaguchi, K. Katagiri, K. Inumaru
"Effects of Electrophoretic Deposition Conditions on the Formation of Colloidal Crystalline/Amorphous Arrays of SiO₂ Particles "
Journal of Sol-Gel Science and Technology, Vol. 104 (2022), 456−463.

[35]* Y. Nakahira, R. Kiyama, A. Yamashita, H. Itou, A. Miura, C. Moriyoshi, Y. Goto, Y. Mizuguchi
"Tuning of upper critical field in a vanadium-based A15 superconductor by the compositionally-complex-alloy concept"
Journal of Materials Science, Vol. 57 (2022), 15990-15998.

[36]* Md. R. Kasem, H. Arima, Y. Ikeda, A. Yamashita, Y. Mizuguchi
"Superconductivity of high-entropy-alloy-type transition-metal zirconide (Fe, Co, Ni, Cu, Ga)Zr₂"
Journal of Physics: Materials, Vol.5 (2022), 045001.

[37] F. I. Abbas, K. Hoshi, A. Yamashita, Y. Nakahira, Y. Goto, A. Miura, C. Moriyoshi, Y. Kuroiwa, K. Terashima, R. Matsumoto, Y. Takano, Y. Mizuguchi
"Lattice Anharmonicity in BiS₂-Based Layered Superconductor RE(O,F)BiS₂ (RE = La, Ce, Pr, Nd)"
Journal of the Physical Society of Japan, Vol. 91 (2022), 074706.

[38]* F. I. Abbas, K. Hoshi, Y. Nakahira, M. Yoshida, A. Yamashita, H. Ito, A. Miura, C. Moriyoshi, C. H. Lee, Y. Mizuguchi
"Estimation of Grüneisen Parameter of Layered Superconductor LaO_0.5F_0.5BiS_2−xSe_x (x = 0.2, 0.4, 0.6, 0.8, 1.0) "
Journal of the Physical Society of Japan, Vol.92 (2023), 014703.

[39]* A. Yamashita, K. Hashimoto, S. Suzuki, Y. Nakanishi, Y. Miyata, T. Maeda, Y. Mizuguchi
"Fabrication of high-entropy REBa₂Cu₃O_7−δ thin films by pulsed laser deposition"
Japanese Journal of Applied Physics, Vol.61 (2022), 050905.

[40]* Y. Nakahira, S. Shimono, Y. Goto, A. Miura, C. Moriyoshi, Y. Mizuguchi
"Synthesis and Characterization of High-Entropy-Alloy-Type Layered Telluride MBi₂Te₄ (M = Ag, In, Sn, Pb, Bi)"
Materials, Vol.15 (2022), 2614.

[41]* F. I. Abbas, Y. Nakahira, A. Yamashita, Md. R. Kasem, M. Yoshida, Y. Goto, A. Miura, K. Terashima, R. Matsumoto, Y. Takano, C. Moriyoshi, Y. Mizuguchi
"Estimation of the Grüneisen Parameter of High-Entropy Alloy-Type Functional Materials: The Cases of REO_0.7F_0.3BiS₂ and MTe"
Condensed Matter, Vol.7 (2022), 34.

[42]* Y. Mizuguchi, Md. R. Kasem, Y. Ikeda
"Anomalous Thermal Expansion in a CuAl₂-type Superconductor CoZr₂"
Journal of the Physical Society of Japan, Vol.91 (2022), 103601.

[43]* Md R. Kasem, R. Ishii, T. Katase, O. Miura, Y. Mizuguchi
"Tuning of carrier concentration and superconductivity in high-entropy-alloy-type metal telluride (AgSnPbBi)_(1-x)/4In_xTe"
Journal of Alloys and Compounds, Vol.920 (2022), 166013.

[44]* J. Kitagawa, K. Hoshi, Y. Kawasaki, R. Koga, Y. Mizuguchi, T. Nishizaki
"Superconductivity and hardness of the equiatomic high-entropy alloy HfMoNbTiZr"
Journal of Alloys and Compounds, Vol.924 (2022), 166473.

[45]* G. M. Pugliese, L. Tortora, G. Tomassucci, R. Md. Kasem, T. Mizokawa, Y. Mizuguchi, N. L. Saini
"Possible local order in the high entropy TrZr₂ superconductors"
Journal of Physics and Chemistry of Solids, Vol.174 (2023), 111154.

[46]* H. Arima, T. Inui, A. Yamashita, A. Miura, H. Itou, C. Moriyoshi, H. Fujihisa, Y. Mizuguchi
"Uniaxial Negative Thermal Expansion in an Orthorhombic Superconductor CoZr₃"
Journal of the Physical Society of Japan, Vol.92 (2023), 024602.

[47]* Y. Watanabe, H. Arima, H. Usui, Y. Mizuguchi
"Sign change in c-axis thermal expansion constant and lattice collapse by Ni substitution in transition-metal zirconide superconductor Co_1−xNi_xZr₂"
Scientific Reports, Vol.13 (2023), 1008.

[48] K. Tamejima, C. Mizuta, N. Nakashima, K. Sakota, S. Shinoda, T. Yatsuhashi
"Reduction and Precipitation of Aqueous Europium (III) under an Air Atmosphere by Near-Infrared Femtosecond Laser Pulses"
J. Photochem. Photobiol. A, Vol. 427 (2022), 113853.

[49] S. Matsuda, N. Nakashima, K. Yokoyama, S. Taniguchi, H. Chosrowjan, T. Somekawa, T. Yatsuhashi
"Laser-fluence dependence of resonance-enhanced multiphoton reduction of trivalent europium"
Chem. Phys. Lett., Vol. 802 (2022), 139759.

[50]* Z. X. Cai, Y. J. Xia, Y. Ito, M. Ohtani, H. Sakamoto, A. Ito, Y. Bai, Z. L. Wang, Y. Yamauchi, T. Fujita
"General Synthesis of MOF Nanotubes via Hydrogen-Bonded Organic Frameworks toward Efficient Hydrogen Evolution Electrocatalysts"
ACS Nano Vol. 16 (2022) 20851–20864. 

[51]* A. A. Tajuddin, M. Wakisaka, T. Ohto, Y. Yu, H. Fukushima, H. Tanimoto, X. G. Li, Y. Misu, S. Jeong, J. Fujita, H. Tada, T. Fujita, M. Takeguchi, K. Takano, K. Matsuoka, Y. Sato, Y. Ito
"Corrosion-Resistant and High-Entropic Non-Noble-Metal Electrodes for Oxygen Evolution in Acidic Media"
Advanced Materials Vol. 35 (2023) 2207466.

[52]* A. Matsumoto, Z. X. Cai, T. Fujita
"Synthesis of Pyrochlore Oxides Containing Ir and Ru for Efficient Oxygen Evolution Reaction"
Materials Vol. 15 (2022) 6107.

​​A02ウ

[1]* H. Xie, G. Wei, J.-P. Du, A. Ishii, G.-H. Lu, P. Yu, S. Ogata
"Shuffling pathway of anti-twinning in body-centered-cubic metals"
Scripta Materialia, Vol. 222 (2022), 114999.

[2]* J.-P. Du, P. Yu, S. Shinzato, F.-S. Meng, Y. Sato, Y. Li, Y. Fan, S. Ogata
"Chemical domain structure and its formation kinetics in CrCoNi medium-entropy alloy"
Acta Materialia, Vol. 240 (2022), 118314.

[3]* Y. Li, J.-P. Du, P. Yu, R. Li, S. Shinzato, Q. Peng, S. Ogata
"Chemical ordering effect on the radiation resistance of a CoNiCrFeMn high-entropy alloy"
Computational Materials Science Vol. 214 (2022), 111764.

[4]* T. Suzudo, K. Ebihara, T. Tsuru, H. Mori
"Cleavages along {110} in bcc iron emit dislocations from the curved crack fronts"
Scientific Reports Vol. 12 (2022), 19701.

[5]* Y. Shiihara, Y. Itai, I. Lobzenko, T. Tsuru,
"Atomic Stress State Inside fcc and bcc Random Alloys: A First-Principles Approach"
Frontiers in Mater. 9 (2022), 895626.

[6]* 都留智仁
"電子構造解析に基づく転位運動のモデリングとナノスケールの力学問題への応用"
材料 71-8 (2022), 660–665. 

[7]* 栗原健輔, Ivan Lobzenko, 都留智仁, 芹澤愛
"Al-Mg-X（X=Si, Ge）合金における溶質原子および空孔間の相互作用"
軽金属, 第72巻第7号, (2022), 427–429.

[8]* D. Wei, W. Gong, T. Tsuru, et al.
"Mechanical behaviors of equiatomic and near-equiatomic face-centered-cubic phase high-entropy alloys probed using in situ neutron diffraction"
International Journal of Plasticity Vol. 158 (2022), 103417.

[9]* D. Wei, W. Gong, T. Tsuru, et al.
"Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys"
International Journal of Plasticity Vol. 159 (2022), 103443.

[10]* I. Lobzenko, D. Wei, M. Itakura, Y. Shiihara, T. Tsuru
"Improvement effect on mechanical properties in Co-free medium-entropy alloys: A first-principles study"
Results in Materials Vol. 17 (2023), 100364.

[11]* I. Lobzenko, Y. Shiihara, H. Mori, T. Tsuru
"Influence of group IV element on basic mechanical properties of BCC medium-entropy alloys using machine-learning potentials"
Computational Materials Science Vol. 219 (2023), 112010.

[12]* T. Shimokawa, K. Hara and T. Niiyama
"Synergistic Effect of Different Plastic Deformation Modes: Molecular Dynamics Study on Strength of Crystalline/Amorphous Mixed Systems"
Materials Transactions, Vol. 63 (2022), 1224-1231.

[13]* Q. Chen, J. Xu, Y. Su, S. Uehara, S. Bai, Y. Wang, Y. Ootani, N. Ozawa, M. Kubo
"Chemical-Reaction-Induced deformation of Body-Centered cubic iron in supercritical water leading to high risk of cleavage Fracture: A reactive Molecular dynamics study"
Computational Materials Science, Vol. 208 (2022), 111354.

[14]* K. Yuge and K. Kamei
"Canonical Nonlinearity for Coupled Linear Systems"
arXiv:2210.11609 [cond-mat.stat-mech].

[15]* K. Yuge and I. Nishihara
"Geometric Study on Canonical Nonlinearity for FCC-based binary Alloys"
arXiv:4684525 [cond-mat.stat-mech].

[16] H. Liao, H. Kimizuka, H. Miyoshi, S. Ogata
"Origin of the nucleation preference of coherent and semicoherent nanoprecipitates in Al–Cu alloys based on atomistically informed classical nucleation theory"
Journal of Alloys and Compounds, Vol. 938 (2022), 168559.

[17] Y. Li, J. Lin, J. Li, S. Ogata, W.T. Geng
"Friedel Oscillations Induce Hydrogen Accumulation near the Σ3 (111) Twin Boundaries in γ-Fe"
Steel Research International, Vol. 93 (2022), 2200324.

[18] R. Zheng, W. Gong, J.-P Du, S. Gao, M. Liu, G. Li, T. Kawasaki, S. Harjo, C. Ma, S. Ogata, N. Tsuji
"Rediscovery of Hall-Petch strengthening in bulk ultrafine grained pure Mg at cryogenic temperature: A combined in-situ neutron diffraction and electron microscopy study"
Acta Materialia, Vol. 238 (2022), 118243.

[19] V. Wang, J.-P. Du, H. Somekawa, S. Ogata, W. T. Geng
"Spin Polarization of Mn Could Enhance Grain Boundary Sliding in Mg"
Materials, Vol. 15 (2022), 3483.

[20] Z.-Y. Nie, Y. Sato, S. Ogata, M. J. Duarte, G. Dehm, J. Li, E. Ma, D.-G. Xie, Z.-W. Shan
"Ultralong one-dimensional plastic zone created in aluminum underneath a nanoscale indent"
Acta Materialia, Vol. 232 (2022), 117944.

[21] R. Hossain, H. Kimizuka, Y. Shiihara, S. Ogata
"Core structure and Peierls barrier of basal edge dislocations in Ti₃AlC₂ MAX phase"
Computational Materials Science, Vol. 209 (2022), 111366.

[22] M. Yamaguchi, T. Tsuru, M. Itakura, E. Abe
"Atomistic weak interaction criterion for the specificity of liquid metal embrittlement "
Scientific Reports Vol. 12 (2022), 10886.

[23] S. Sugie and K. Yuge
"Tropical Diagram for Linear-Nonlinear Boundary in Canonical Ensemble"
Journal of the Physical Society of Japan, Vol. 91(2022), 064802.

A02エ

[1]* Taichi Abe, Kwangsik Han, Yumi Goto, Ikuo Ohnuma, and Toshiyuki Koyama
"Stabilization of equiatomic solutions due to high-entropy effect"
Materials Transaction, Vol.64 (2023), 877-884.

[2]* Nguyen-Dung Tran, Theresa Davey, Ying Chen
"DFT Calculations of Structural, Magnetic and Stability of FeNiCo-based and FeNiCr- based Quaternary Alloys"
J. Applied Physics, 133, 045101 (12pp) (2023).

[3] ​​​​T. Furuhara, Y. Zhang, M. Sato, G. Miyamoto, M. Enoki, H. Ohtani, T. Uesugi, H. Numakura
"Sublattice alloy design of high-strength steels: application of clustering and nanoscale precipitation of interstitial and substitutional solutes"
Scripta Materialia, 223(2023), 115063

[4]* M. Funamoto, Y. Matsuoka, Y. Tsukada, and T. Koyama
"Prediction of grain boundary chemistry in multicomponent alloys"
Science and Technology of Advanced Materials: Methods, 2 (2022), 322-333.

[5]* Xinming Wang, Nguyen-Dung Tran, Ying Chen
"Element-wise representations with ECNet for material property prediction and applications in high-entropy alloys"
et. al., npj Computational Materials, 8, 253 (10pp) (2022).

[6]* S. P. Pendem, N. Ueshima, K. Oikawa, Y. Tsukada, and T. Koyama
"Thermodynamic and atomic mobility assessment of the Co–Fe–Mn system"
Journal of Materials Science, 57 (2022) , 15999-16015

[7]* K. Oikawa, N. Ueshima
"Experimental Investigation and Thermodynamic Assessment of Ni–B and Ni–B–C"
J Phase Equilibria Diffus., Vol. 43 (2022), 814–826.

[8]* K. Han, M. Saito, J. Xia, I. Ohnuma, R. Kainuma
"Experimental determination of phase diagram involving silicides in the FeSi binary system"
Journal of Alloys and Compounds, Vol. 919 (2022) 165810.

[9] 徳永辰也，元村優太，恵良秀則，土山聡宏，菖蒲一久, 長谷部光弘, 大谷博司
"α鉄におけるホウ素，炭素の粒界偏析に及ぼす合金元素の影響"
鉄と鋼, 109,No.3, (2023) 158-166.

[10] M. Enoki, S. Minamoto, I. Ohnuma, T. Abe, H. Ohtani
"Current Status and Future Scope of Phase Diagram Studies"
ISIJ Int. 63,No.3, (2023) 407-418

[11] Lei Wang, Ying Chen, Hideo Miura, Ken Suzuki and Cong Wang
"Penta-graphene and phagraphene: thermal expansion, linear compressibility and Poisson’s ratio"  
J. Phys.: Condens. Matter. 34, 505301 (11pp) (2022).

[12] Lei Wang, Ying Chen
"Anharmonic Interaction in Negative Thermal Expansion Material CaTiF₆"
et. al., Inorg. Chem. 61, 17378−17386 (2022).

[13] Lei Wang, Ying Chen, Hideo Miura, Ken Suzuki and Cong Wang
"Tunable uniaxial, area, and volume negative thermal expansion in quartz-like and diamond-like metal–organic frameworks"
RSC Adv.,12 21770-21779 (2022).

[14] Theresa Davey, Ying Chen
"Vacancy ordering in substoichiometric zirconium carbide: A review"
Int. J. Ceramic Eng. Sci.1-24 (2022).

[15] Jinkai Wang, Hao Wang, Ying Chen
"The effect of impurities on stacking fault energy and dislocation properties in γ-TiAl"
et. al., Vacuum 197, 110866 (7pp) (2022).

[16] J.J. Ruan, Y.Y. Chen, K. Kobayashi, N. Ueshima, K. Oikawa
"Investigations on the Phase Transformations, Equilibria and Athermal ω in Ni-Ga-Cr Ternary System"
Materials, Vol. 15 (2022), 7617.

[17] Y. Matsuoka, M. Bian, X. Huang, Y. Tsukada, T. Koyama, Y. Chino
"Simulation-aided analysis on mechanical properties of dilute Mg-Zn-Ca alloy sheets"
Journal of Alloys and Compounds, 906 (2022) , 164285.

[18] Y. Ishiguro, X. Huang, Y. Tsukada, T. Koyama, Y. Chino
"Effect of bending and tension deformation on the texture evolution and stretch formability of Mg–Zn–RE–Zr alloy"
International Journal of Minerals, Metallurgy and Materials, 29 (2022) , 1334-1342.

[19] M. Bian, I. Nakatsugawa, Y. Matsuoka, X. Huang, Y. Tsukada, T. Koyama, Y. Chino
"Improving the mechanical and corrosion properties of pure magnesium by parts-per-million-level alloying"
Acta Materialia, 241 (2022) , 118393.

[20] S. Takeno, H. Fukuoka, Y. Tsukada, T. Koyama, M. Shiga, I. Takeuchi, M. Karasuyama
"A generalized framework of multifidelity max-value entropy search through joint entropy"
Neural Computation, 34 (2022) , 2145-2203.

[21] Ryo Tamura, Guillaume Deffrennes, Kwangsik Han, Taichi Abe, Haruhiko Morito, Yasuyuki Nakamura, Masanobu Naito, Ryoji Katsube, Yoshitaro Nose, Kei Terayama
"Machine-Learning-Based phase diagram construction for high-throughput batch experiments"
Science and Technology of Advanced Materials: Methods, Vol. 2 (2022), 153-161.

A03オ

[1]* Baoqi Guo, Ranjit K. Ray, Shuhei Yoshida, Yu Bai, Nobuhiro Tsuji
“In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy”
Scripta Materialia, Vol. 215 (2022), 114706

[2]* Yoji Miyajima, Tomohiro Nagata, Kohei Takeda, Shuhei Yoshida, Satoshi Yasuno, Chihiro Watanabe, Ishikawa Kazuhiro, Hiroki Adachi and Nobuhiro Tsuji
“Destruction of mesoscopic chemically modulated domains in single phase high entropy alloy via plastic deformation”
Scientific Reports, Vol. 240 (2022), 118356

[3]* Reza Gholizadeh, Shuhei Yoshida, Yu Bai, Shu Kurokawa, Akinobu Shibata, Nobuhiro Tsuji
“Global understanding of deformation behavior in CoCrFeMnNi high entropy alloy under high-strain torsion deformation at a wide range of elevated temperatures”
 Acta Materialia, Vol. 243 (2023), 118514

[4] V. Paul, Y. Wang, K. Ameyama, M. Kawabata, T. Ohmura
“Nanomechanical Analysis of SUS304L Stainless Steel with Bimodal Distribution in Grain Size”
Materials Transactions, Vol.63, No.4 (2022), 545-554.

[5] T. Shimokawa, T. Hasegawa, K. Kiyota, T. Niiyama, K. Ameyama
“Heterogeneous evolution of lattice defects leading to high strength and high ductility in harmonic structure materials through atomic and dislocation simulations”
Acta Materiala, Vol.226 (2022), 17679

[6] Z. Zhe, X. Zhai, G. Chen, X. Chen, K. Ameyama
“Enhanced synergy of strength-ductility and low-cycle fatigue resistance of high-entropy alloy through harmonic structure design”​​​​​​​
Scripta Materialia, Vol.213 (2022), 114591.

[7] C. Menapace, B. Sharma, K. Ameyama
“Hot Deformation Behavior of PM Ni with Harmonic Microstructure”
Metals, Vol.12 (2022), 90.

[8] B.Sharma, K. Yagi, S. K. Vajpai, H. Fujiwara, K. Ameyama
“A novel Bimodal Milling (BiM) approach to achieve harmonic structured SUS316L with controlled microstructure and outstanding mechanical performance”​​​​​​​
Powder Technology,  Vol.399 (2022), 117188.

[9] ​​​​​​​K. Ameyama, F. Cazes, H. Couque, G. Dirras, S. Kikuchi, J. Li, F. Mompiou, K. Mondal, D. Orlov, B. Sharma, D. Tingaud, S. K. Vajpai
“Harmonic Structure, a promising microstructure design”
Materials Research Letters, Vol.10 (2022), 440-471.

[10] J. Chatellier, E. Sjögren-Levin, K. Ameyama, D. Orlov
“Mechanics of accelerated strain hardening in harmonic-structure materials”
Materials Science and Engineering, Vol.1249 (2022), 012012.

[11] E. Sjögren-Levin, W. Pantleon, A. Ahadi, Z. Hegedüs, U. Lienert, N. Tsuji, K. Ameyama, D. Orlov
“Separation of XRD peak profiles in single-phase metals with bimodal grain structure to analyze stress partitioning”
Materials Science and Engineering, Vol.1249 (2022), 012040.

[12]* J. Wang, Z. Zhang, H. Dai, H. Fujiwara, X. Chen, K. Ameyama
“Enhanced corrosion resistance of CoCrFeMnNi high entropy alloy using heterogeneous structure design”
Corrosion Science, Vol.209 (2022), 110761.

[13] H. K. Park, Y. Kim, J. Jung, H. H.Lee, J. Park, K. Ameyama, H. S.Kim
“Efficient design of harmonic structure using an integrated hetero deformation induced hardening model and machine learning algorithm"
Acta Materialia, Vol.244 (2023), 118583.

[14] V. Paul, K. Ameyama, M. O. Kawabata, T. Ohmura
“Evaluation of Deformation and Fracture Behavior in 304L Austenitic Steel Harmonic Structures through Nanoindentation”
STEEL RESEARCH INTERNATIONAL, (2022), 2200354

[15] Y. Nakai, S. Kikuchi, D. Shiozawa, T. Hase, I. Nakazawa, K. Fujita, M. O. Kawabata, K. Ameyama
“Evaluation of Dislocation Density of Coarse and Fine Grains in Bimodal Harmonic Structured Steel Observed by Diffraction Contrast Tomography using Ultrabright Synchrotron Radiation”​​​​​​​
 ADVANCED ENGINEERING MATERIALS, (2023), 201836.

[16] E. Sjögren-Levin, W. Pantleon, Z. Hegedus, U. Linert, A. Ahadi, N. Tsuji, K. Ameyama, D. Orlov
“Stress partitioning in harmonic structure materials at the early stages of tensile loading studied in situ by synchrotron X-ray diffraction”
Scripta Materialia, Vol. 226 (2023), 115186.

[17]  Y. Nakai, S. Kikuchi, D. Shiozawa, I. Nakazawa, K. Fujita, M. O. Kawabata, K. Ameyama
“Misorientation Measurement in Tensile Test of Bimodal Harmonic Structured Stainless Steel by Diffraction Contrast Tomography Using Ultrabright Synchrotron Radiation X-ray”​​​​​​​
Procedia Structural Integrity, Vol. 43 (2023), 221–227.

[18]* ​​​​D. Banik, B. Bhushan, S. Mukherjee, J. Bhagyaraj, H. Fujiwara, K. Ameyama, K. Mondal
“Effect of harmonic structure on the electrochemical behavior of high entropy Cantor alloy in NaCl solution”
Materials Chemistry and Physics, Vol. 298 (2023), 127414.

[19]^* J. Li, K. Yamanaka, Y. Hayasaka, A Chiba
“Suzuki hardening and segregation in Co_0.95Cr_0.8Fe_0.25Ni_1.8Mo_0.475 high-entropy alloys”​​​​​​​
Scripta Materialia, Vol. 226 (2023), 115260.

[20] S. Yim, K. Aoyagi, K. Yanagihara, H. Bian, A Chiba
“Effect of mechanical ball milling on the electrical and powder bed properties of gas-atomized Ti–48Al–2Cr–2Nb and elucidation of the smoke mechanism in the powder bed fusion electron beam melting process”​​​​​​​
Journal of Materials Science and Technology, Vol. 864 (2023), 144595.

[21] Y. Gui, H. Bian, K. Aoyagi, A Chiba
“Development of macro-defect-free PBF-EB-processed Ti–6Al–4V alloys with superior plasticity using PREP-synthesized powder and machine learning-assisted process optimization”
Materials Letters, Vol. 328 (2022), 133096.

[22] K. Yamanaka, M. Mori, Y. Onuki, S. Sato, A Chiba
“Dislocation Density of Electron Beam Powder Bed Fusion Ti−6Al−4V Alloys Determined via Time-Of-Flight Neutron Diffraction Line-Profile Analysis”
Metals, Vol. 226 (2022), 115260.

[23]^* D. Wei, G. Wu, T. Tsuru, I. Lobzenko, X. Li, S. Harjo, T. Kawasaki, H.-S. Do, J. W. Bae, C. Wagner, G. Laplanche, Y. Koizumi, H. Adachi, K. Aoyagi, A Chiba, B.-J. Lee, H. S. Kim, H. Kato
“Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys”​​​​​​​
International Journal of Plasticity, Vol. 159 (2022), 103443.

[24] M. Mori, K. Yamanaka, Y. Onuki, S. Sato, A Chiba
“Analysis of hierarchical microstructural evolution in electron beam powder bed fusion Ti–6Al–4V alloys via time-of-flight neutron diffraction”​​​​​​​
Additive Manufacturing Letters, Vol. 3 (2022), 100053.
​​​
[25]* A.W. Abdelghany, M. Jaskari, A.S. Hamada, A. Järvenpää, H.A. El-Hofy, A Chiba, M.A.-H. Gepreel
“Hot deformation behavior and constitutive modeling of a cost-effective Al₈Cr₁₂Mn₂₅Ni₂₀Fe₃₅ high-entropy alloy”
Journal of Alloys and Compounds, Vol. 982 (2022), 167028.

[26] Y. Gui, H. Bian, K. Aoyagi, A Chiba
“Microstructure evolution and hardness of S30C carbon steel produced by powder bed fusion using an electron beam and subsequent heat treatments”
Materials Letters, Vol. 328 (2022), 133096.

[27] S. Yim, K. Aoyagi, K. Yanagihara, H. Bian, A Chiba
“Effect of mechanical ball milling on the electrical and powder bed properties of gas-atomized Ti–48Al–2Cr–2Nb and elucidation of the smoke mechanism in the powder bed fusion electron beam melting process”​​​​​​​
Journal of Materials Science and Technology, Vol. 864 (2023), 144595.

[28]* S. Aota, K. Yamanaka, M. Mori, N. Sasaki, J. Adrien, E. Maire, D. Fabrègue, A Chiba
“Solidification behavior and porosity in electron-beam powder bed fusion of Co–Cr–Mo alloys: Effect of carbon concentrations”​​​​​​​
Additive Manufacturing, Vol. 59 (2022), 103134.

[29]* S. Yim, K. Aoyagi, H. Bian, Y. Cui, A Chiba
“Factors determining the flowability and spreading quality of gas-atomized Ti-48Al-2Cr-2Nb powders in powder bed fusion additive manufacturing”​​​​​​​
Powder Technology, Vol. 412 (2022), 117996.

[30] Y. Zhao, K. Aoyagi, K. Yamanaka, A Chiba
“A survey on basic influencing factors of solidified grain morphology during electron beam melting”​​​​​​​
Materials & Design, Vol. 221 (2022), 110927.

[31] Y. Zhao, H. Bian, H. Wang, K. Aoyagi, K. Yamanaka, A Chiba
“Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing”​​​​​​​
Materials & Design, Vol. 221 (2022), 110915.
​​​​​​​
[32] Y. Gui, K. Aoyagi, H. Bian, A. Chiba
“Detection, classification and prediction of internal defects from surface morphology data of metal parts fabricated by powder bed fusion type additive manufacturing using an electron beam”​​​​​​​
Additive Manufacturing, Vol. 54 (2022), 102736.

[33] S. Yim, H. Bian, K. Aoyagi, K. Yanagihara, S.-I. Kitamura, H. Manabe, Y. Daino, Y. Hayasaka, K. Yamanaka, A. Chiba
“Ball-milling treatment of gas-atomized Ti–48Al–2Cr–2Nb powder and its effect on preventing smoking during electron beam powder bed fusion building process”​​​​​​​
Additive Manufacturing, Vol. 51 (2022), 102634.

[34]^* ​​​​​​​J. Li, K. Yamanaka, A Chiba
“Significant lattice-distortion effect on compressive deformation in Mo-added CoCrFeNi-based high-entropy alloys”​​​​​​​
Materials Science and Engineering A, Vol. 830 (2022), 142295.

[35] 山川剛平, 卞華康, 青柳健大, 山中謙太, 千葉晶彦
“電子ビーム粉末床溶融結合法により作製したAlSi10Mg合金積層造形体のT6処理に伴う組織変化”
軽金属, Vol. 72 (2022), 321-326.

[36] S. Yim, H. Bian, K. Aoyagi, K. Yamanaka, A. Chiba
“Spreading behavior of Ti–48Al–2Cr–2Nb powders in powder bed fusion additive manufacturing process: Experimental and discrete element method study”​​​​​​​
Additive Manufacturing, Vol. 49 (2022), 102489.

[37]^* ​​​​​​​Y. Wang, Y. Tomota, T. Ohmura, W. Gong, S. Harjo
“Evolution of austenite lattice parameter during isothermal transformation in a 0.4 C low alloyed steel”​​​​​​​
Materialia, Vol. 27 (2023), 101685.

[38]^* N. Tsuchida, R. Ueji, W. Gong, T. Kawasaki, S. Harjo
“Stress partitioning between bcc and cementite phases discussed from phase stress and dislocation density in martensite steels”
Scripta Materialia, Vol.222 (2023), 115002.

[39] T. Sawaguchi, Y. Tomota, F. Yoshinaka, S. Harjo
“Evidence supporting reversible martensitic transformation under cyclic loading on Fe–Mn–Si–Al alloys using in situ neutron diffraction”
Acta Materialia, Vol. 242 (2023), 118494.

[40] T-N. Lam, H-H. Chin, X. Zhang, R. Feng, H. Wang, C-Y. Chiang, SY. Lee, T. Kawasaki, S. Harjo, P.K. Liaw, E-W. Huang
“Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy”​​​​​​​
Acta Materialia, Vol.245 (2023), 118585.

[41]* W. Woo, YS. Kim, HB. Chae, SY. Lee, JS. Jeong, CM. Lee, JW. Won, YS. Na, T. Kawasaki, S. Harjo
“Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys”
Acta Materialia, Vol.246 (2023), 118699.

[42]  T-N. Lam, M-Y. Luo, T. Kawasaki, S. Harjo, J. Jain, S-Y. Lee, A-C. Yeh, E-W. Huang
“Tensile response of As-cast CoCrFeNi and CoCrFeMnNi high-entropy alloys”
Crystals, Vol.12 (2022), 157.

[43] YS. Kim, H. Chae, E-W. Huang, J. Jain, S. Harjo, T. Kawasaki, SI. Hong, SY. Lee
“Microstructural Evolution and Mechanical Properties of Non-Equiatomic (CoNi) _74.66 Cr₁₇Fe₈C_{0. 34} High-Entropy Alloy”
Materials, Vol.15 (2022), 1312.

[44] S. Xu, T. Odaira, S. Sato, X. Xu, T. Omori, S. Harjo, T. Kawasaki, H. Seiner, K. Zoubková, Y. Murakami, R. Kainuma
“Non-Hookean large elastic deformation in bulk crystalline metals”
Nature communications, Vol.13 (2022), 5307.

[45]* NR. Jaladurgam, A. Lozinko, S. Guo, S. Harjo, MH. Colliander
“Load redistribution in eutectic high entropy alloy AlCoCrFeNi_{2. 1} during high temperature deformation”
Materialia, Vol.22 (2022), 101392.

[46] M-Y. Luo, T-N. Lam, P-T. Wang, N-T. Tsou, Y-J. Chang, R. Feng, T. Kawasaki, S. Harjo, P.K. Liaw, A-C. Yeh, SY. Lee, J. Jaint, E-W. Huang
“Grain-size-dependent microstructure effects on cyclic deformation mechanisms in CoCrFeMnNi high-entropy-alloys”
Scripta Materialia, Vol.210 (2022), 114459.

[47] T. Odaira, S. Xu, K. Hirata, X. Xu, T. Omori, K. Ueki, K. Ueda, T. Narushima, M. Nagasako, S. Harjo, T. Kawasaki, L. Bodnárová, P. Sedlák, H. Seiner, R. Kainuma
“Flexible and Tough Superelastic Co–Cr Alloys for Biomedical Applications”
Advanced Materials, Vol.34 (2022), 2202305.

[48] S. Harjo, W. Gong, T. Kawasaki, S. Morooka, T. Yamashita
“Revisit Deformation Behavior of Lath Martensite”
ISIJ International, Vol.62 (2022), 1990-1999.

[49] HS. Kwon, ​​​​​​​S. Harjo, T. Kawasaki, W. Gong, SG. Jeong, ES. Kim, P. Sathiyamoorthi, H. Kato, HS. Kim
“Work hardening behavior of hot-rolled metastable Fe₅₀Co₂₅Ni₁₀Al₅Ti₅Mo₅ medium-entropy alloy: in situ neutron diffraction analysis”
Science and Technology of Advanced Materials, Vol.23 (2022), 579-586.

A03カ

[1]^* ​​​​​​Tadashi Furuhara, Yongjie Zhang, Mitsutaka Sato, Goro Miyamoto, Masanori Enoki, Hiroshi Ohtani, Tokuteru Uesugi, Hiroshi Numakura
"Sublattice alloy design of high-strength steels - application of nanoscale clustering of interstitial and substitutional solutes –"
Scripta Materialia, Vol. 223 (2023), 115063.

[2]^* Yulin Xie, Goro Miyamoto, Tadashi Furuhara
"Nano-sized Cr-N clustering in expanded austenite layer of low temperature plasma nitrided Fe-35Ni-10Cr alloy"​​​​​​​
Scripta Materialia, Vol. 213(2022), 114637.

[3]^* ​​​​​​​Daixiu Wei, Liqiang Wang, Yongjie Zhang, Wu Gong, Tomohito Tsuru, Ivan Lobzenko, Jing Jiang, Stefanus Harjo, Takuro Kawasaki, Jae Wung Bae, Wenjun Lu, Zhen Lu, Yuichiro Hayasaka, Takanori Kiguchi, Norihiko L. Okamoto, Tetsu Ichitsubo, Hyoung Seop Kim, Tadashi Furuhara, Evan Ma, Hidemi Kato
"Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys"
Acta Materialia, Vol. 225(2022), 117571.

[4]^* Yicheng Zhang, Koji Inoue, Tatsuya Tokunaga, Manabu Ishimaru, Hidenori Era
"Investigation of nano-scale phase formation in rapidly solidified Fe₂₀Co₂₀Ni₂₀Cr₂₀B_20-xSi_x alloys"
Mater. Trans. Vol. 63 (2022), 1211-1216.

[5]^* G. Kitahara, A. Yoshiasa, S. Ishimaru, K. Terai, M. Tokuda, D. Nishio–Hamane, T. Tanaka and K. Sugiyama
"Crystal structures of rhodium-containing erlichmanite-laurite solid solutions (Os_1-x-yRu_xRh_yS₂: x = 0.09–0.60, y = 0.07–0.10) with unique compositional dependence"​​​​​​​
Mineralogical Magazine (Published online by Cambridge University Press: 22 December 2022).

[6]^* ​​​​​​​M. Tokuda, K. Tanaka and K. Sugiyama
"Syntheses and structures of ammonium transition-metal dialuminium tris­(phosphate) dihydrates (NH₄)MAl₄(PO₄)₃·2H₂O (M = Mn and Ni) "​​​​​​​
Acta Cryst. (2023). E79, 116-119.

[7]^* R. Yamane, M. Tokuda and K. Sugiyama
"Determination of orientational ordering of hydroxy groups in kulanite between 120-353 K using single-crystal X-ray diffraction"​​​​​​​
Journal of Mineralogical and Petrological Science, 118 (2023), 220701.

[8]^* Akira Yoshiasa, ​​​​​​​Ginga Kitahara, Makoto Tokuda, Satoko Ishimaru, Shin-ichiro Ono, Kunihisa Terai, Akihiko Nakatsuka, Kazumasa Sugiyama
"Single-crystal structure refinements and Debye temperatures of Ir₂S₃ kashinite and Rh₂S₃ bowieite​​​​​​​"
Acta Cryst. (2022). C78, 606-611​​​​​​​

[9]^* T. Nakamura, M. Matsumoto, K. Amano, Y. Enokido, M. E. Zolensky, T. Mikouchi, H. Genda, S. Tanaka, M. Y. Zolotov, K. Kurosawa, S. Wakita, R. Hyodo, H. Nagano, D. Nakashima, Y. Takahashi, Y. Fujioka, M. Kikuri, E. Kagawa, M. Matsuoka, A. J. Brearley, A. Tsuchiyama, M. Uedugi, J. Mmatsuno, Y. Kimuraa, M. Sato, R. E. Milliken, E. Tatsumi, S. Sugita, T. Hiroi, K. Kitazato, D. Brownlee, D. J. Joswiak, M. Takahashi, K. Ninoyama, T. Takahashi, T. Osawa, K. TEerada, F. E. Brenker, B. J. Tkalcec, L. Vincze, R. Brunetto, A. AlÉon-Toppani, Q. H. S. Chan, M. Roskosz, J.-C. Viennet, P. Beck, E. E. Alp, T. Michikami, Y. Nagaashi, T. Tsuji, Y. Ino, J. Martinez, J. Han, A. Dolocan, R. J. Bodnar, M. Tanaka, H. Yoshida, K. Sugiyama, A. J. King, K. Fukushi, H. Suga, S. Yamashita, T. Kawai, K. Inoue, A. Nakato, T. Noguchi, F. Vilas, A. R. Hendrix, C. Jaramillo-Correa, D. L. Domingue, G. Dominguez, Z. Gainsforth, C. Engrand, J. Duprat, S. S. Russell, E. Bonato, C. Ma, T. Kawamoto, T. Wada, S. Watanabe, R. Endo, S. Enju, L. Riu, S. Rubino, P. Tack, S. Takeshita, Y. Takeichi, A. Takeuchi, A. Takigawa, D. Takir, T. Tanigaki, A. Taniguchi, K. Tsukamoto, T. Yagi, S. Yamada, K. Yamamoto, Y. Yamashita, M. Yasutake, K. Uesugi, I. Umegaki, I. Chiu, T. Ishizaki, S. Okumura, E. Palomba, C. Pilorget, S. M. Potin, A. Alasli, S. Anada, Y. Araki, N. Sskatani, C. Schultz, O. Sekizawa, S. D. Sitzman, K. Sugiura, M. Sun, E. Dartois, E. De Pauw, Z. Dionnet, Z. Djouadi, G. Falkenberg, R. Fujita, T. Fukami, I. R. Gearba, K. Hagiya, M. Y. Hu, T. Kato, T. Kawamura, M. Kimura, M. K. Kubo, F. Langenhost, C. Lzntz, B. Lavina, M. Lindner, J. Zhao, B. Vekemans, D. Baklouti, B. Bazi, F. Borondics, S. Nagasawa, G. Nishiyama, K. Nitta, J. Mathurin, T. Matsumoto, I. Mitsukawa, H. Miura, A. Miyake, Y. Miyake, H. Yurimoto, R. Okazaki, H. Yabuta, H. Naraoka, K. Ssakamoto, S. Tachibana, H. C. Connolly JR., D. S. Lauretta, M. Yoshitake, M. Yoshikawa, K. Yoshikawa, K. Yoshihara, Y. Yokoto, K. Yokata, H. Yano, Y. Yaamoto, D. Yamamoto, M. Yamada, T. Yamada, T. Yada, K. Wada, T. Usui, R. Tsukizaki, F. Terui, H. Takeuchi, Y. Takei, A. Iwamae, H. Soejima, K. Shirai, Y. Shimaki, H. Ssenshu, H. Sawada, T. Saiki, M. Ozaki, G. Ono, T. Okada, N. Ogawa, K. Ogawa, R. Noguchi, H. Noda, M. Nishimura, N. Namiki, S. Nskazawa, T. Morota, A. Miyazaki, A. Miura, Y. Mimasu, K. Matsumoto, K. Kumagai, T. Kouyama, S. Kikuchi, K. Kawaahara, S. Kameda, T. Iwata, Y. Ishihara, M. Ishiguro, H. Ikeda, S. Hosoda, R. Honda, C. Honda, Y. Hitomi, N. Hirata, N. HIirata, T. Hayashi, M. Hayakawa, K. Hatakeda, S. Furuya, R. Fukai, A. Fujii, Y. Cho, M. Arakawa, M. Abe, S. Watanabe, and Y. Tuda
"Formation and evolution of carbonaceous asteroid Ryugu: Direct evidence from returned samples"
Science, First release, 22 Sep, 2022

[10]^* ​​​​​​​A. Z. Laila, M. Fronzi, S. Kumegai, K. Sugiyama, R. Furui, and A. Yamamoto
"High-Pressure Synthesis of High-Entropy Metal Disulfides with Pyrite-Type Structure"
J. Phys. Soc. Jpn., 91 (2022), 084802

[11]^* S. Marugata, H. Kagi, Y. Ijichi, K. Komatsu, X. Xue, K. Sugiyama
"Experimental evidence of static disorder of carbonate ions in Ba-doped calcite"
Journal of Solid State Chemistry, 312 (2022), 123258

[12]^* ​​​​​​​G. Kitahara, A. Yoshiasa, M. Tokuda, M. Nespolo, H. Hongu, K. Momma, R. Miyawaki and K. Sugiyama
"Crystal structure, XANES and charge distribution investigation of krennerite and sylvanite: analysis of Au-Te and Te-Te bonds in Au_1–xAg_xTe₂ group minerals"​​​​​​​
Acta Cryst., B78 (2022), 117-132

[13]^* ​​​​​​​M. Tokuda, K. Yubuta, T. Shishido, and K. Sugiyama
"Redetermination of the crystal structures of rare-earth trirhodium diboride RERh₃B₂ ( RE = Pr, Nd and Sm) from single-crystal X-ray data"​​​​​​​
Acta Cryst., E78 (2022), 76-79

[14] Kouji Sakaki, Hyunjeong Kim, Eric H. Majzoub, Akihiko Machida, Tetsu Watanuki,  Kazutaka Ikeda, Toshiya Otomo, Masataka Mizuno, Daiju Matsumura, Yumiko Nakamura
"Displacement of hydrogen position in di-hydride of V-Ti-Cr solid solution alloys"
Acta Materialia, 234 (2022) 118055

A03公募

[1]^* Y. Mizuguchi, Md. R. Kasem, Y. Ikeda
"Anomalous thermal expansion in a CuAl2-type superconductor CoZr₂"
J. Phys. Soc. Jpn. 91, 103601 (2022)

[2]^* Md. R. Kasem, H. Arima, Y. Ikeda, A. Yamashita and Y. Mizuguchi
"Superconductivity of high-entropy-alloy-type transition-metal zirconide (Fe,Co,Ni,Cu,Ga)Zr₂"
J. Phys. Mater. 5 045001 (2022)

[3] M. Nakamura, H. Akamatsu, K. Fujii, Y. Nambu, Y. Ikeda, T. Kanazawa, S. Nozawa, M. Yashima, K. Hayashi, K. Maeda
"Synthesis of Hydride-Doped Perovskite Stannate with Visible Light Absorption Capability"
Inorg. Chem. 2022, 61, 17, 6584–6593

[4] T. Nagase, T. Nishikubo, M. Fukuda, Y. Sakai, K. Shigematsu, Y. Ikeda, Y. Nambu, Q. Zhang, M. Matsuda, K. Mibu, M. Azuma, T. Yamamoto
"SrV_0.3 Fe_0.7 O_2.8 : A Vacancy-Ordered Iron-Based Perovskite Exhibiting Room-Temperature Magnetoresistance"
Inorg. Chem. 2022, 61, 24, 8987-8991

[5]* G. Andrade, G. Zepon, K. Edalati, A. Mohammadi, Z. Ma, H.W. Li, R. Floriano
"Crystal structure and hydrogen storage properties of AB-type TiZrNbCrFeNi high-entropy alloy"
International Journal of Hydrogen Energy, Vol. 48 (2023), 13555-13565.

[6]* P. Edalati, Y. Itagoe, H. Ishihara, T. Ishihara, H. Emami, M. Arita, M. Fuji, K. Edalati
"Visible-light photocatalytic oxygen production on a high-entropy oxide with multiple-heterojunction introduction"​​​​​​​
Journal of Photochemistry and Photobiology A, Vol. 433 (2022), 114167.

[7]* S. Akrami, P. Edalati, Y. Shundo, M. Watanabe, T. Ishihara, M. Fuji, K. Edalati
"Significant CO₂ photoreduction on a high-entropy oxynitride"​​​​​​​
Chemical Engineering Journal, Vol. 449 (2022), 137800.

[8]* A. Mohammadi, P. Edalati, M. Arita, J.W. Bae, H.S. Kim, K. Edalati
"Microstructure and defect effects on strength and hydrogen embrittlement of high-entropy alloy CrMnFeCoNi processed by high-pressure torsion"​​​​​​​
Materials Science and Engineering A, Vol. 844 (2022), 143179.

[9]* A. Mohammadi, M. Novelli, M. Arita, J.W. Bae, H.S. Kim, T. Grosdidier, K. Edalati
"Gradient-structured high-entropy alloy with improved combination of strength and hydrogen embrittlement resistance"​​​​​​​
Corrosion Science, Vol. 200 (2022), 110253.

[10]* S. Akrami, Y. Murakami, M. Watanabe, T. Ishihara, M. Arita, M. Fuji, K. Edalati
"Defective high-entropy oxide photocatalyst with high activity for CO₂ conversion"​​​​​​​
Applied Catalysis B, Vol. 303 (2022), 120896.

[11]* A. Mohammadi, Y. Ikeda, P. Edalati, M. Mito, B. Grabowski, H.W. Li, K. Edalati
"High-entropy hydrides for fast and reversible hydrogen storage at room temperature: binding-energy engineering via first-principles calculations and experiments"​​​​​​​
Acta Materialia, Vol. 236 (2022), 118117.

[12]* P. Edalati, A. Mohammadi, Y. Li, H.W. Li, R. Floriano, M. Fuji, K. Edalati
"High-entropy alloys as anode materials of nickel - metal hydride batteries"​​​​​​​
Scripta Materialia, Vol. 209 (2022), 114387.

[13]* P. Edalati, A. Mohammadi, M. Ketabchi, K. Edalati
"Microstructure and microhardness of dual-phase high-entropy alloy by high-pressure torsion: twins and stacking faults in FCC and dislocations in BCC"​​​​​​​
Journal of Alloys and Compounds, Vol. 894 (2022), 162413.

[14]* H. Shimizu, M. Yuasa, H. Miyamoto, K. Edalati
"Corrosion behavior of ultrafine grained CoCrFeMnNi high-entropy alloys fabricated by high-pressure torsion"​​​​​​​
Materials, Vol. 15 (2022), 1007.

[15]* F. Alijania, M. Reihanian, K. Gheisari, K. Edalati, H. Miyamoto
"Effect of homogenization on microstructure and hardness of arc-melted FeCoNiMn high entropy alloy during high-pressure torsion (HPT)"​​​​​​​
Journal of Materials Engineering and Performance, Vol. 31 (2022), 5080-5089.

[16]* R. Floriano, K. Edalati, K. Danielle Pereira, A. Ducati Luchessi
"Titanium-protein nanocomposites as new biomaterials produced by high-pressure torsion"
Scientific Reports, Vol. 13 (2023), 470.

[17]* K. Edalati, Q. Wang, N. Enikeev, L.J. Peters, M.J. Zehetbauer, E. Schafler
"Significance of strain rate in severe plastic deformation on steady-state microstructure and strength"
Materials Science and Engineering A, Vol. 859 (2022), 144231.

[18]* K. Edalati, I. Taniguchi, R. Floriano, A. Ducati Luchessi
"Glycine amino acid transformation under impacts by small solar system bodies, simulated by high-pressure torsion method"
Scientific Reports, Vol. 12 (2022), 5677.

[19]* S. Akrami, Y. Murakami, M. Watanabe, T. Ishihara, M. Arita, Q. Guo, M. Fuji, K. Edalati
"Enhanced CO₂ conversion on highly-strained and oxygen-deficient BiVO₄ photocatalyst"​​​​​​​
Chemical Engineering Journal, Vol. 442 (2022), 136209.

[20]* R.B. Figueiredo, K. Edalati, T.G. Langdon
"Effect of creep parameters on the steady-state flow stress of pure metals processed by high-pressure torsion"
Materials Science and Engineering A, Vol. 835 (2022), 142666.

[21]* Y. Tang, M. Murayama, K. Edalati, Q. Wang, S. Iikubo, T. Masuda, Y. Higo, Y. Tange, Y. Ohishi, M. Mito, Z. Horita
"Phase transformations in Al-Ti-Mg powders consolidated by high-pressure torsion: experiments and first-principles calculations"
Journal of Alloys and Compounds, Vol. 889 (2022), 161815.

[22] ​​​​​​​F. Alijani, M. Reihanian, K. Gheisari, K. Edalati, H. Miyamoto
"Effect of Homogenization on Microstructure and Hardness of Arc-Melted FeCoNiMn High Entropy Alloy During High-Pressure Torsion (HPT)"​​​​​​​
Journal of Materials Engineering and Performance (2022).